Recent content by a c t i v e X

onto thi topic of 2013 EC with Sachs/Zocks Hi guys how does this combination of 2013 EC feels? (the Zocks 45 compared to Sachs 48) sold my 2011 250E and checking on 2013 in general, beside of ground clearance and looks, accessories and parts, how is the dynamic feeling and suspension feels?

50t sprocket will one of them fit 50t sprocket? the original guide can't be used when changing from 48t>50t

I've drilled extra 15 holes in my 250EC 2011's basket to get better lub

i don't have thise priveledge unfortunately, on the 5 months summer ,the days here are over 30*C.... some are closer to 40*C but than it's more of a rider overheating than the machine the 180*F you've seen are 85*C. while i've got ~ 250*F does anyone modded KTM fan or GG fan to fit 2T...

Hi I've added the trailtech temp sensor. bike is 250EC 2T in smooth ride it shows 65-70 degrees (C) in more technical over 80-85 and in some hard climbs with feet on the ground etc., reached 110C:eek: but no spalshing water what so ever, but smelled hot... is it normal or do i overheat it...

I've looked at the MOOSE and it looks pretty thin and without much of surface to use. this guard is really covering the pipe nicely (but cost almost 90$, still worth for keeping the pipe in good shape)

Hi I got a FLATLAND guard for KTM EXC (stock pipe) and with bit of plastic hammer and one sawing got nice fitment for EC250 2011, have a look:) I've taped on the inner side a sticky thin foam to eliminate space that makes skweeks and gather dirt inside

vapor is indeed OEM partr in latest EC's note that the protector plate is really a must for crashers/extremers/bad luckers... the speedo itself sits on 2 tiny screws directly to lower body plastic, brakes so easily it's a joke (my experience) note that for E starts with main ignition key, some...

e-start I've asked gofasters and Mark replied it won't :(

looks like a hoax... this machine looks almost brand new is it really '07? amazing

nice nice this guard looks great for extra protection. can you add pic of the other side as well? how is it bolt on ? and the clutch cover, is it bold on top of the actual cover as guard or replace it?

indeed, mine was bent that the tip end touched the lever, looked like snail... was recovered partially in the field (placed in the rear sprocket) and hopefully will be better when pre-heated and using press and more "surgical" tools

Bike year: 2011 model: EC250E mods: carb tuning only Gearing: 13:48 (standard) Top speed: ~140 as i've seen what kind of ridding do you do: mostly tight, rocks, woods. in the winter dunes and open desert Result: pretty good, may try 13:50- for the rocks. carb jetting with 'rain' map provides...

looking good I have those guards on the same bike but with the CRM mount . very solid in HD falls... don't you use the odometer? I've added the trailtech ALU guard for it BTW, the bike is a dream. handling and suspension are amazing compared to past i've owned and competitors (for tight...

hi thumperrider1, does they have an online store?