Recent content by acmetrapper62

I have 01 gasgas 250 ec. I ride at around 1,500 feet ruffly. With 50:1 93 octane mix gas . It used to be 32 :1 and I want to change it to 50:1. The needle that was in it before was nozf with a 38 pilot and I could not read the other number for main jet. I have a needle laying around n1ef idk if...

I?m think in buying a new bike I?m considering a 19 gasgas 300 xc. I was wondering does bike vibrate like the older Ktm?s. And the newer gasgas have a counter balancer so it vibrates less like the newer Ktm?s

For sale: 01 gasgas 250 ec New top end G2 throttle cam Srt chain new sprockets S12 tires front and rear Pro action suspension full front and rear revalve 175 lb rider Fmf power core 2 silencer Messico header pipe Enduro engineering seat cover Uni air filter Large power valve cover 10 oz...

I need help I screwed up my hub on gasgas I need to know what wheel interchanged with it or is there a easy way I need to know

I have a 01gasgas 250 xc how do u know when it time to get a total rebuild is there any after market crank main bearing out there u can buy what about connecting rod what year cr 250 bikes will work . Like what are symptom when u need a bottom end and top rebuild.

i have a 2001 gasgas 250 xc I just ordered a g2 cam throttle tube and a 10 oz check point flywheel weight and I all so have the over size power valve cover. did I get the right size flywheel weight the 10 oz or no I race gnccc and other hare scrambles what other thing can mellow the power...

I just put 93 octane gas in it idles better and less piston slap but that chadder is still there but I thing it coming head pipe inside that area i don't know it has less than 300 hrs and it has the orgigal brakes and sprockets I'm thinking around 100 hr or less does gasgas are know for power...

I'm pretty sure it's stock it like a rattle sound do u think my reads are bad u think I runs fine it runs like I bought it It was always woods rode not riden hard never used for motocross could I do a comprsetion test what good compression number I'm pretty sure it's comin from the engine

I have a 2001 gas gas 250 xc/ ec model it has 300 low hours on it makin a werid ticking or clacking or some type of sound I never hear before idkk if it the top end needs done or my power valves need cleaned or adjusted. U can notice it at low speeds and idle my air filter was real dirty...

I just want to get more low end out of the 2001 gas gas 250 xc I have now idk what flywheel weight oz to pick

well im a big on ktm ok but I have a gas gas 250xc right now that I use for hardscramble.... im like the odd ball everyone uses ktm.... what bike whould u get for my size and weight im 5'8 155pd with gear on... what the big difference from the ktm 300 xc and the xcw and the 250 xc and xcw and...

I have the 2k-2 in ignition with ha lightest fly wheel came with the bike oem what size add on fly wheel weight oz would u pick for harescambles and awrcs races I have the larger front power valve cover I would to get more lowend out of it.. to and smooth out the power but I like to run...

I would like to know where u get the stock fender with the oem hebo sticker and were the cheapest

is there a way u can put v force reeds in that year of bike

is this a gas gas 250 ec or xc how do u tell and it a 2001. it was a dealer display model back in 2001 and never road and it does not have a light on it idk if he took the lighting of or what great wood bike im racing harescramble with I just got it I just need info on it