Anders's latest activity

Yes they are. Although metric (if that is uncommon in your part of the world).

The transmission bearings are all standard ones. I guess most of the old ones will have markings on the side. Take them to a bearing...

I figured out the issue this weekend, just posting in case it helps someone. I took the starter solenoid off and bench tested it. I put...

Yep. I took a look during the weekend. In my case, the black and orange wires are connected directly to the map switch. There is a dual...

Just google the part number and you will find it a lot of places.

I will have to look at my own bike again to see if I see what you mean. It may take a few days.

Good find! I agree that it looks like a casting error. How thick are the cases at that point? I have no experience with such matters...

Could it be a leak somewhere else? are the gasket faces all good? Could it leak between the case halves?

They have pipes for 250/300, but no mention of the 200.

In that case you just connect them back together.

If there was a (FMF or other) pipe for the 15 model EC200 available I would be interested.

To find out if you need a switch, just disconnect them and take a ride. If you feel any difference in the way the engine behaves from...

I bought the bike without mapswitch and installed the switch at a later stage. I'm not sure, but I think connecting the black and orange...

An other option to Megasquirt could be the Ignijet from Ignitech. I have no personal experience with either, but have used Ignitech...

This is from my 06 EC200. The map switch makes or brakes the contact between the orange and black wires with the bullet connectors to...