Anders's latest activity

I did a racetech gold valve kit in my KYBs on the 06 model. Worked quite OK, but not optimal. Later, with the 48mm Marzocchis on my...

youve been very helpful already. i service my bike on the local rieju store and the guy who has it is like a friend. so when hes back...

I think 450 MX forks will have too much compression damping for trail riding, but if you take your time and are used to working on...

I run a much tighter squish. But on the other side, I have also cut the head to get the correct compression with that low squish. These...

I ended up with buying from him as well. I got a brand new 2015 silencer and some other small parts. worked out very well.

I put a set of Yamaha YZ Kyb SSS on my 06 model. I used the Yamaha triple clamps, but kept the GG wheel. I had to turn some new bushings...

Had the Ranger 3 months as of tomorrow, and it's been an excellent bike! She's now at 75 hours and 1225 miles. No major issues or...

I think it will be easier to find something if you tell us where you are.

If its too long, I guess you could just put it in the lathe and part it off to the right size? Or are they hardened ?

Wasn't it only the '12 models? They changed it pretty soon after they started using plastic, as there were quite few that broke off.

Not good. I did something similar 3? years ago. The physio said 12-18 months to be back to normal. She was right. But now I'm back to...

Found another bolt and put it all together again. Did my first ride on it yesterday, it seems to work well. The new Radius CX clutch is...

I can now confirm that the EC200 crank bolt has a normal right-hand thread. When I turned it counterclockwise with the impact wrench it...

I found this on thumpertalk: https://www.thumpertalk.com/forums/topic/1404455-ec200-2003-crankshaft-seal-replacement/ This suggests...

Yes, I thought so. But I'm unable to move it 😡 My impact wrench won't do it and neither can I even if I lock the clutch basket and use a...