Anders's latest activity

Sorry, forgot about it during the weekend. Just hold the line, please...

The short answer is yes, probably. Although I do not know, I have never tried to use anything else than pipes made for the 200. But the...

https://forum.gasgasrider.org/threads/dual-map-cdi-on-250.435/

I just replaced my own clutch. I had worn out my Rekluse EXP 3.0 and put in a (lightly used) Radius CX. As the basket was also worn...

I have one on my 06, I presume its the same for 08. If you have two "free" connections on your CDI, they may be for the map switch. If I...

I did a racetech gold valve kit in my KYBs on the 06 model. Worked quite OK, but not optimal. Later, with the 48mm Marzocchis on my...

youve been very helpful already. i service my bike on the local rieju store and the guy who has it is like a friend. so when hes back...

I think 450 MX forks will have too much compression damping for trail riding, but if you take your time and are used to working on...

I run a much tighter squish. But on the other side, I have also cut the head to get the correct compression with that low squish. These...

I ended up with buying from him as well. I got a brand new 2015 silencer and some other small parts. worked out very well.

I put a set of Yamaha YZ Kyb SSS on my 06 model. I used the Yamaha triple clamps, but kept the GG wheel. I had to turn some new bushings...

Had the Ranger 3 months as of tomorrow, and it's been an excellent bike! She's now at 75 hours and 1225 miles. No major issues or...

I think it will be easier to find something if you tell us where you are.

If its too long, I guess you could just put it in the lathe and part it off to the right size? Or are they hardened ?

Wasn't it only the '12 models? They changed it pretty soon after they started using plastic, as there were quite few that broke off.