Recent content by booth

How do I figure out which ones are incorrect then? Everything looks right?

I am sure that is correct? Anyone else care to venture a guess?

Ok, so I got the gears repaired and have this weekend tried to re-assemble asI have been busy at work. I know have a problem I cannot understand. When the cases are snapped back together, the clutch input side of the gear sets, turns two turns and locks up, the counter sprocket side rotates...

Also took the gear sets in,and the local company here will charge me less than US$30 to repair both gears, so pretty happy with that, and I will have them back by Friday, so not all bad news.... They say will be as strong as original

All the bearings in the motor were replaced when it was split, so they are all brand new SKF bearings

Shift forks etc all look good will put them on a surface plate to check, just weird to me how it actually broke?

Yep still worried about what caused the failure in the first place, so worried I replace them and the same thing happens. Hows your bike after replacing gears? We have a local company here, that can repair or make new gears, so will send it off to them for repair.

So after completely redoing my 300 from scratch, it ran beautifully, then one run, pinned 5th, flat out on a massive climb, I shifted down to 4th and the 3rd, when I grabbed third, the bike seemed to "lose" power and slowed dramatically, as I can to a complete stop I heard a metallic clunk...

Ok, so this might also help someone in the future, I got hold of the local Beta trials bike importer and bought a complete master cylinder unit for late model Beta Trials bike for R1450.00 less than $90.00 and it fits and works perfectly, it bolts straight on, no modifications at all needed ...

Thanks for that, might just make use of that, though shipping to South Africa might be a problem, I will contact them to find out

Would just replace the fluid? Mine is leaking by the master cylinder and won't hold pressure, so I can't even ride.

I have a 2011 EC300 with a AJP clutch master cylinder, our local agents do not have the rebuild kits or the seals. Does anyone know if off the shelf seals fit this unit? My only other option is to replace it and that is not a cheap fix. Would appreciate any assistance or feedback please.

I just put my bike together and ran it yesterday. Motor everything ran great, about 2 hours into the ride while climbing a massive dune, hit at 3/4 throttle wide open in 5th gear, half way up while changing to 4th, motor started laboring and bike slowed down. Get down the hill and would not...

Man that looks good Rockefeller, plenty effort there, looks really good, well done

Fitted Cycra Pro-Bend bark busters/ Hand Guards,Hyde skid plate and Hyde Swingarm Guards. Motor runs like a dream, jetting spot on, just have a gearbox issue I am to scared to check on at the moment....