It finally runs
I got another stator and my bike fired right up. I'm still not sure why the other one would run then quit but i also don't have a profesional volt meter so it may have just got too weak. Thank everyone for all the suggestions and help.
prolly the stator
I had several people tell me that they all believe that it is a bad stator. I have an original gas gas stator coming so maybe I can let you know if it works within the week. I did find out as far as the pulse coil is concerned, a pulse coil from a 2001 rm 250 works.
Does anyone know what if any stators will crossover to a 99 ec250. Don't have the money for new but can find various other brands for cheap elsewhere. Thanks for the help.
electrical
OK, I have a stator from an rm, new gasgas cdi, new gasgas coil and still nothing. I hve checked my kill switch and as far as i can tell there is not a short( checked it with ohm meter). I think it is getting good power after the cdi but it barley registers anything after the...
pulse coil
Ok I am not getting anything from the pulse coil wires. There should be a low level charge correct? I called and cannot get a pulse coil by itself so does anyone know of a substitue?
update
I put on a new plug, checked all the connections, and pulled off and checked the kill switch. Still nothing! I am hoping it is the pulse coil because it's all that's left. I am getting power to the cdi but on my meter nothing is coming out. Could that be caused by the pulse coil not...
I have 99 ec250, about 3 months ago my bike lost its fire. I have tested the power coming from stator and it looks good. I just bought a new cdi and a new coil. I still have no spark. I am completly confused. could it be the pickup senser from the side of the stator? And to add to it, it...
workout
Anyone wanting to increase their fitness should check out www.crossfit.com . This is by far the best program ever devised. I can ride at full bore hours and feel great afterwords. It looks a little different at first but just give it a chance.:)
Does anyone know of a crossover part to replace the coil on a 2 stroke. I would think that the coil would be pretty generic across the board right?:confused:
Cdi?
i hope u do , i would like the newon but just do not have he money to get one for several months at least and do not want to be without that long.
2000 model cdi
Ok i have been told that the 2000 model cdi is the same. Does anyone have one laying aroud, I just don't have the 360 for a new one and am really missing my bike right now.
2000 model cdi
Ok i have been told that the 2000 model cdi is the same. Does anyone have one laying aroud, I just don't have the 360 for a new one and am really missing my bike right now.
2000 model cdi
Ok i have been told that the 2000 model cdi is the same. Does anyone have one laying aroud, I just don't have the 360 for a new one and am really missing my bike right now.