Recent content by BryanMcc

Thanks Jake, I'll try a different plunger before I jet it anymore.

It has the cable choke. My last one broke at the threads and was a pain getting it out of the woods that day. So I think I'll put the std knob In it. Also, I thought I read you have measured the JD needles before, I have their spreadsheets, is there two similar needles I can use in the...

I believe it's an AS2 on this bike, it doesn't have a screw top cap. I'll try a 165

it has a 170 in it now. JD recommended 40 to 1 instead of 32 to1 to help the drool problem. its horrendous. 170 was still rich tonight even at 4k feet. lowest elevation I have ridden all year. Jake, would you go to a 168 next or just go straight 165?

throttle pos just wide open. thinking or dropping to a 165 main, although jd thinks I may need to go one clip richer on the needle if I do.

Messed with the stock needle on my 15 xc300. Never did really get it sorted. Bought a JD kit, this is my 3rd kit from them, all three other bikes we very very close with the recommended settings. 1st ride, 5k feet elevation, 60 degrees, used JD recommended 175 main, 38 pilot, red # 4, bike...

got it, went to a red in the #4, 175 main, 40 pilot. much better response. rode to 6500 feet, still lots of spooge, ill be going to the red in clip 3 and the 170. should be better yet. jd needle is much better it seems than the N1ef it came with.

Could anyone upload the instructions for me? I want to get the new 2015 300 running right before we ride it. I'm done with the stock needle and have a JD kit just sitting here off my 2010 300. My understanding is the needles are the same for all the keihin kits. I have the n1eg needle on the...

Plug was ran at 5k feet 45 degrees out. Moab will be 4 to 5k feet but min 20 degrees warmer. JD jet chart shows it being richer at 4k 70 degrees then 5k 45 degrees. I ran it yesterday at 3300 feet and 70 degrees. Seemed to pull hard. I'll be bringing all my tools to ReJET if necessary and my...

I used jakobis method to check pilot jet size with the airscrew. Took three turns out to get to highest idle. I went smaller on the pilot, one step larger on the main and I tried the needle a clip lower and it tried to load up after a few slower sections. Runs good now. I have a hard ti.e...

I hear ya man...I had several buddies, including the one the helped me give CPR tell me they were done sledding for good. But as I explained to them: if it's something you love to do, don't give up. Easier said then done, I know, especially after being on the scene. We have had several...

accident Truly sorry to hear of the accident. I unfortunately can relate as a friend of mine was killed in an avalanche while we were out riding snowmobiles on new years day 2012. Several of us know CPR but he still died from blunt trauma. It really causes you to look at riding differently...

first off, just wanted to see what the common opinion is on this plug color. its not a plug chop, just pulled out of my bike after 3 hours of riding. Should still give a general idea of the jetting right? also my bike has been fairly finicky to start cold, I noticed I accidently put a br8es...

ec450 nice bike....know it well:) can attest to it being well maintained strong running bike...also Kyle didnt you just put a brand new battery in it begining of this riding season?