Recent content by CanGasser

  1. CanGasser

    Multiple bike part out

    I'm interested in the street 07 frame do you have the ownership and is it street legal?
  2. CanGasser

    2007 GASGAS 300 EC Rebuild

    It's Alive Well she is complete took the Gasser out for a small ride the other day. Sure has some punch now. I attached a vid of the first start up. Just need to work on the jetting from having the head shaved, but I'll sort that out. www.youtube.com/watch?v=b8anBiB-CeM[/url]
  3. CanGasser

    2007 GasGas to KYB SSS forks

    Just a little update, got the new forks mounted and what a simple job by using a complete YZ front end. For the stops I found some at the RV store for entry doors. Cut about 3/8" off the top of them and worked out out well.
  4. CanGasser

    Neater crossover thread?

    Here is my list. GASGAS cross over 2007 GASGAS EC300 rear wheel bearings ALLBALLS 25-1458 fork gaurds 2006 cr 250 Kick Starer 04 KTM 450 EXC Oil drain and oil fill plug 2000 Yamaha YZF 426 Side Stand Trail Tech 2004 ktm 250 SX small modification to stand 2004 KTM seat foam rear wheel bearing...
  5. CanGasser

    KYB SSS Fork question

    Ya I couldn't find anything either, my plan was to buy a set of gold valves and revalve it myself. But the different spring lengths have me confused a little. Thinking I might need to find a matching spring. This is what you get from ebay sometimes, lucky the fork tubes are in nice shape.
  6. CanGasser

    KYB SSS Fork question

    So I bought a set of KYB SSS forks off ebay. I have never had a set of these, once I opened them up I found a broken piston. Ordered a new set of pistons and found one side to have different valving. The left side has a longer spring and looks to be the stock valve. The right side has a shorter...
  7. CanGasser

    2007 GASGAS 300 EC Rebuild

    Funny ya first time on tubeliss, been running soft rubber for a few years now been liking them. Always fun to go around your buddy when he can't climb any further.:D
  8. CanGasser

    2007 GASGAS 300 EC Rebuild

    I almost for got, picked up one of the 23oz fly whhels and had some material machined to 15.6oz. So I guess will see if I like it found the bike really good before but thought I would give it a try.
  9. CanGasser

    2007 GASGAS 300 EC Rebuild

    Here is a little update on my Gasser rebuild, just put a complete YZF front end on and might try the revalve myself. Thinking about using a YZ fender too. Had the rims powder coated. The exhaust didn't seem to want to go back on I must have really hit it harder than I thought, was able to get it...
  10. CanGasser

    18" rear rim

    One of the members was good enough to give me one of his old rims and only lives about an hour from me. So I sent them out to get power coated. Cleaned up the spokes and reassembled. I think I might cry when I get the first scratch.
  11. CanGasser

    Building a Ec 300 From Scratch

    Those are some entertaining vids!
  12. CanGasser

    I put my first mile on my yz250f 300 gasgas swap bike!!!

    Did you get a chance to weigh this yet?
  13. CanGasser

    23 ounce flywheel weights

    There is a dealer here is Canada dual sport plus, I bought one a couple of weeks ago. I'm not sure if they ship to the USA if not you can have it shipped to my place and I can ship it or could drop it in the mail on the USA side in a few weeks when I an there. If that helps.
  14. CanGasser

    18" rear rim

    Thanks for the link I'll give them a call
Back
Top