Recent content by carlg

Just wondering if anyone knows if the lower fork protectors are interchangeable. I'm looking for something that will work on Ohlins forks from 2001. I'm sure that they are still available from Gofasters, just looking for another option,thanks Carl.

Parts I'm interested basically in the headlight lens but will take the whole assy if you still have it.Thanks Carl.

It is kind of funny that many people aren't familiar with the brand. Most of the people I run into have heard of the trials bikes but weren't aware of the enduro models. I bought Roostafish's 300 and really enjoy the bike. I adopted his reply when anyone ask's and tell them it's a Yamaha with...

Didn't want to wander off topic from the first issue. So I managed to easily remove all the bearings from the linkage using a hand press at work. I took the swingarm in and tried the same process. They seem to be a bit more of a challenge, I really wasn't sure of how much pressure was required...

O rings I'd be interested to know about this as well regarding the o rings and the washers. I have already ordered the rebuild kits from GoFasters which include the seals. Maybe on the next go round I could use the other method.

Bearings What an airhead think I better stick my head out the window for a refill. I pushed harder on one of the bushings and things looked as pictured. Since I have it apart I'm leaning on replacong the works as the grease seals are showing their age and the bearings are a little rough. Thanks...

Another newb question regarding the shock linkage and swingarrm. I was riding in some fairly wet conditions yesterday and decided to inspect the linkage. The bike is on 01 300 just for reference. I have removed the pull rods and the shock at present. I noticed that all of the parts I removed...

Kickstand Jay that looks just like the one on my bike as well. I PM'd contact info to you, thanks Carl.

Kickstand Jay that would be super if you had one. The piece I really need however is the mount as mine is somewhat bent were the actual stand bolts up. Let me know what you find,thanks Carl.

Kickstand Still looking for one if anyone has a spare laying around.

Thanks for all the replies. It would appear that this process is something that you wouldn't want to do out on the trail. I suppose it might be wise to check into replacing all of the rubber pieces on the intake tract just as a precaution. This whole topic came up due to the fact that I wanted...

Another newb question regarding removing the carburator. I've found that unbolting the subframe to be the easiet way to accomplish this. The bike is going on ten years old and the rubber boot doesn't seem to be very flexible, so I didn't have much luck with the subframe in the normal position...

Kickstand Sent you a PM with contact info thanks.

Need a kickstand or at least the mounting bracket for one that will fit an 01 EC-300. I might be able to repair the current bracket but I'd like a spare just the same.

Looking for any opinions on tool kits. I noticed that there are many available from Dennis Kirk, and I do need to come up with something. Are these a good way to go, or do most of you favor building your own so to speak? I know on my last bike I ended up adding a couple pieces just to make thing...