Recent content by dalbertog

Thanks for the help, lifting the subframe up from the lower bolts, then loosening the linkage worked like a charm. Took some time due to top shock mount being a little fiddly, but all done, and shock is on its way to LT R.

Which ones (if aftermarket), what condition, and how much ? Thanks

If that seat is still available, I WANT IT. Please call (914) 646-5168 and I'll make the arrangements. Cheers. Dalbertog (914) 646-5168

Cheers to all, I am looking for a seat pan, or entire seat for '10 EC250. Can anyone out there point me in the right direction to one, thanks. Dalbertog

Will the Rekluse fit a 2010 EC250? And if so, lets talk. Thanks. (914) 646-5168 Dalbertog

Do you know if the pegs will fit a 2010, and if so, are they still available ? Thanks.

Guys, cheers to all, does anyone out there have a seat pan for a 2010 EC250. Need to replace mine as it got shredded last summer in the woods. Does anyone out there have an extra they'd be willing to part with or a complete seat, or, in the alternative where one may be located. Thanks...

Guys, I am having a hard time figuring out how to get the plastics off a '10 EC250 in order to get to the shock. Its time to get it to LT for a service, but for the life of me, I can't figure out the airbox plastics. There are two, that fit together, then the actual plastic covering the airbox...

JP4, thanks for that insight. Its been a while, but I've managed to get to/at most of the bike and repair, clean, and inspect 95% of it. However, I am still stuck on getting that ?#$@ air box cover off. You mentioned taking the rivets out and replacing them (you said "cutting in") with an M8...

Guys, thanks a million, that parts list is something I could really use, however, I am not sure, but (i think) it does not show the airbox cover/plastic. I found the screws, but it looks like the airbox cover somehow fits into the fender shroud and I still can't figure out how to dislodge the...

Guys, I have a new (to me) '10 EC250 that I want to take apart and clean up for this season, however I am stuck on taking the rear plastic off. Its a three piece system (including the fender) that I can't figure out. Can someone PLEASE let me know how to get those plastics off without me...

I am looking to upgrade the light kit on my '10 EC250, and was wondering who out there has done it and which ones work best for the EC250, thanks.

Thanks for the reply. It looks like my local shop IS listening to me, since that is how I ride here in NY.

Does anyone know the difference between the main needles that can be used. my '10 EC250 came with an N1EG, but my local shop is trying to get me to use a CCH (?) needle, which does not appear on the needle chart on the "sticky" list. Can anyone help me decipher the whole needle biz. Also my...

Now that the cooler weather is coming, and changes in air density will start to affect carburetion, can anyone out there provide me with some pointers as to how to jet my '10 EC250 ? As it is I am having enough trouble keeping the bike running clean during "normal" temps. What changes do we do...