Recent content by Dan

Sorry I thought I added a photo when I made the post but i must have messed up trying to attach it! They are the same as the ones in the post that has been linked above though! I did see that post but I saw a few others posts elsewhere saying they shouldn?t have adjustment on that nut so I got...

Can someone tell me if this red nut on top is actually a preload adjustment? I have looked on the manual on here for my forks on my 13 250 and it makes no mention at all of this. It does say that the top nut is how you undo the cap but I notice they both turned a lot first as if they are...

Does Anybody have a front wheel spindle to fit a 2013 ec250 in the uk

After spending hours and hours confusing myself with reading all the different threads on here regarding needles I thought I may aswel just outright ask if anybody can help. A lot of what I see on here is about the 300 so want to make sure I get it right I?m wanting to bin the standard needle...

Thanks all. I will have a look for a Magura that would fit then in case it starts to leak again.

This is a screen shot from the video as I can?t upload the video to the site not sure how good it is or clear

Bike shop fitted a new seal kit and it?s leaking after one ride Obviously I took it back to be redone and he has said that the bore looks worn and that?s why it?s leaking so will probably leak again after this new seal

I have a video of where the leak is and according to the guy that was going to weld it it can?t be saved. I have managed to find one from an 02 model on eBay but have no idea if it is going to fit and can?t seem to find a definitive answer anywhere online!

Really not having any luck with my bike right now. Does anybody know which other years or models may fit a 2013 ec left hand side rad

Can anybody help me with what clutch master cylinder I may be able to swap/upgrade to on my bike. It currently has an ajp one fitted that is coming to the end of its life I feel so looking for some ideas on what to replace it with. Thanks

Thank you for the info. I will have to pull it all apart over the weekend and see exactly what I do and don?t have in play still.

Thank you both for your help I will have a look and see if I can find the power from the yellow power wire go from there!

Hi I am in the uk. Unfortunately I have nothing other than the front light, rear light and kill switch. Oh and the map switch is still there too.

Hi all. I?m hoping for a little bit of help if that?s possible. I recently bought the ec250 and I?m trying to figure out some of the wiring. It looks like a previous owner has stripped all switchgear and just taped all wires up basically Meaning none of the lights work. I wouldn?t mind being...