Recent content by Dread

Thats great Hallsy, cheers

Thanks very much for your input, beyond the call of duty. So that being known (N89x) what diameter (x) should i choose, do i stick with the diameter i have ? ie the H or do i need to adjust this value to compensate at all? Sorry, I am just unsure of the effect this is will be making. I am really...

I would consider a bigger slide cutaway, I believe the #7 slide is the main contributor to this hesitation coming off closed throttle. Certainly worked for me grinding to #8 when i changed needle to the N3EH. and found it just as you described. The only thing I would change now is to have the...

Thanks for the input, I am very close to spot on but may go slightly further with the slide grinding to make it #8.5. Currently #8. I could still do with getting the needle clip in the middle position so i have some adjustment available come the warmer weather. The current needle is the N3EH...

Thanks very much , I love a good grind 👌

Well my enthusiasm got the better of me so using photos I have found on the net as a guide I have modified my #7 slide to be a #8 slide. The result is fantastic, clean strong torque all the way through the range. the Fourstroking (blubbering) at 1/4 throttle is gone. Yeehaa Now considering...

Well my enthusiasm got the better of me so using photos I have found on the net as a guide I have modified my #7 slide to be a #8 slide. The result is fantastic, clean strong torque all the way through the range. the Fourstroking (blubbering) at 1/4 throttle is gone. Yeehaa Now considering...

Thanks for your thoughts, The needle jet is in good condition not too many hours on the bike .

Thanks Jeff, I have the slide well down, there is some response from the airscrew but it is not very dynamic. I have tried the 42 pilot and it is too rich. I am waiting on a 38 that I was going to try with a CCK keihin needle, as with that needle it was slow to clean up from a closed throttle...

Hi all, I have been experimenting with my jetting and i am getting close to what i am seeking with the N3EH KTM needle. However it is on the top clip #1 and it still blubbers around 1/4 throttle, I am thinking this is the first taper a little rich? I would like to be where I am now everywhere...

Thanks for that. all sorted :)

Hi all great forum and sorry that my first post seems to be a problem easily solved but i am struggling. I bought an Apico 1.4 bar cap for mx/ enduro but it is too big to fit in the rad kneck, the size I need has a 27mm diameter plunger. Does anyone have an acurate crossover source for my bike...