Recent content by eddy field1

this might help but he does make it look abit easy http://www.youtube.com/watch?v=tPnQ67CVHXg i would say use plenty of mousse lube to help it last longer and lots of tyre soap to get it on.

Think the TM EN models have a weight might just be able to get one from a dealer?

ye could well be that was definitely the master cylinder as ive put a AJP on it and its alot better now, still not as light as my old ec 125 but closer now :)

Need to put new seals in my 50mm shivers and not sure how to get them apart i have done the 45mm shivers before how similar the 50's to 45's. Do i need a special tool to get the top caps off the manual is not that helpful :( Also i have been advised to put in 5w oil instead of the 7.5w the...

tape up wiring mabey if you havent already done it and some wrap round hand gaurds ?

ive done this before using a propane torch and had to use almost 50 psi!! but the ideal pressure is ment to be around 20-30 psi this should be fine with oxyacetylene as it will obviously get it alot hotter. My friend has even gone as high as 100 psi glad i wasn't there!!!! his pipe dint explode...

am i being silly or is that a different water pump/cover?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290397569560&ssPageName=STRK:MESELX:IT#ht_500wt_1182

Think im gunna get some mousses. never ride at high speeds for long as i only do hare and hounds or play in woods. should be able to keep them dry as i change tires alot putting old ones on for practising and new ones for racing so they should last a while. I also never use f.i.m tires as i dont...

What are people using? and what do you think of mousses?

i recently rode a 2010 gasser and the forks were deffently not as good a the marz 50mm or 45mm. just seemed very harsh nearly flipped me over bars on first big bump haha. Dont have any complaints about the shocks though.

There's nothing wrong with how the clutch works mechanically im just been picky and would lick it to be lighter after riding gasser it seems heavy haha I will get a ride report after i get chance to race the bike 7th of march i think

Hi you may of read my other thread about chosing between a TM 144 and a gasser 200. Well i picked the TM which may not help me on this forum haha but the TM one seems to have very little interest. i love the new bike but the clutch i quite have especially when compered to my old EC 125 it has...

kawasaki :)

http://www.blackbirdracing.com/stickers_gas/ec_125_02_06/pre_cut_enduro_backgrounds.html?do=Mi1Fbi0tOTcxLS0yODUtMi0tLQ%3D%3D This what your after?