Recent content by Enduroger

The updated wires made a big difference on my 18 EC250. And with the bigger battery my starter haven't failed a single time. If the starter cables can't deliver enough power from the battery the starter will take power from the alternator also which is probably why the ignition coil doesn't get...

Sounds like it could be one of the bolts holding the counterweights on the crankshafts that might have backed out and locking the crank. Take the topend off and look for a M6 allen head bolt between the crankweights. This happened to my 2004 EC200 a couple of years ago. I stopped the engine...

I don't have any problem with it either. I think its good actually. Have seen some people on other bikes driving away with the kickstand down. Have you got the cable and battery upgrade?

I'm not sure actually. I think you might be right that it replaces the + cable. Maybe i have misunderstood since lots of people have been talking about the ground. And it also says "negativo bateria" on the bag the cable came in. But it made a big difference for me to only replace the ground and...

Haven't found any info about that. Can't find much info other than on their twitter. https://twitter.com/gasgasmotos

I have a 18 EC250 and my dealer sended me a Skyrich 4Ah 240cca battery and a ground cable that runs from the battery to the startmotor bracket. And also a positive (red+) cable from battery to the starter relay and now it starts both hot and cold. Before the upgrade it only started when the...

Not good but I saw on twitter that they said the fire has only affected 5% of the plant and has not affected the production line. The manufacturing, engine and office lines are still fully operational.

I know that the FGGG1283 are for Sachs but i dont know if it fits my fork. Is it the shim settings thats different between FGGG1182 and 1283 or are they two types of Sachs fork?

Does anyone know whats different between Ohlins FGGG1182 and FGGG1283 cartridges? How do i know which one fits my Sachs fork?