Recent content by enstanka

Since I have never ridden any other EC300 than my own 08, I am very curious on the power caracteristics before and after your modification to your 08. i.e how would my engine change in feel if I increase the PV pre load? //

I use Dexron VI ATF in my EC300 08. It works great so far. //

Update, After a closer check it turned out that with the 8X16X1.5 mm washer, the PV vas binding half way in its travel. There was NO way i could make my PV work properly with the washer in place. It felt realy good with some play in the closed position, but it would bind half way. My...

I have now fitted a washer (#39) with the dimentions 8X16X1.5 mm, as in the description for #39. The washer fitted perfectly, reducing the axial play to a few thenths of a mm from almost 2mm. The missing washer, is this a change in production, well who knows. The washer sure fitted perfectly in...

In my brand new 08 EC300 the washer shown in the parts list on the left side was not fitted (item #39). I am going to find me a 8X16X1.5 mm washer and fit it as shown in the parts list.

The PV shaft is "half moon shaped", and fit in a coresponding half moon in the bracket that is held in place by the allen screw. Undo the screw and look carefully and you will see what I mean. Turn the PV shaft and poke a finger in the exhaust port so you will feel when the PV is closed, that...

Brake pads or the brake caliper can rattle. If the noise goes away when aplying the brake gently, then caliper/pads are the problem. //