Recent content by eralha

I got rid of the starter problems by selling the bike. :( I got tired of chasing a problem that i could not solve and spent a considerable amount of money in, it is a shame that i could no use a feature that a paid for. I still loved everything else about the bike.

Hi Doc, In the winter i ride mine with the powervalve at 1 turn out, it became very soft on power delivery, but i noticed that i gained a lot of bottom end torque, i can climb without slip the rear wheel and without stalling the engine. In your case try put it at 1.5 turns and 1 and see if...

Does any any knows the size of the puller to this flywheel? I messured the inside thread of the flywheel and got 25.3mm

I checked the throttle cable and needle, the thing that is most strange to me is if i richen the mixture the bike will do this more often, if i lean it it will only do it on ocasion, like after washing the bike i can do an entire ride without it doing the high rpm. What it seems to me is that as...

Hi, a couple of rides ago after washing my bike and heading back home i noticed that the rpms would not drop after acceleration it would keep accelerating. Cleaned carb checked the reeds and put a clean air filter, next ride it run good until after the end of the ride where it started to do it...

Just a quick question, if i measure with a multimeter, with the negative on the starter engine body and a positive on the + starter engine coil, how many Volts should i read? Mine is reading +/- 8V. the batery is reading 13v. I'm a noob with eletronics, i need tome guidance, if i put the...

Thanks Doc!

As others have said you are missing the bearing, it seems that the inner race of the bearing is still on the shaft, if i was i your position i would take the right cover out and check if it is on the bottom of the case.

You have the links for the allballs kits i ordered and confirmed the size, the links are on the first page. cheers.

Hi, the bushings for a KYB will fit a marzocchi 48: https://www.extracross.com/Suspension/Aftermarket-spare-parts/Front-fork-bushing/translate-528.html?language=en https://www.extracross.com/Suspension/Aftermarket-spare-parts/Front-fork-bushing/fork-bushing-marzocchi-48mm-inner-tube.html This...

The KYB allballs kit will fit the Marzocchi 48, bushings and oil seals, i checked this website description that is bushings for a Marzocchi 48: https://www.extracross.com/Suspension/Aftermarket-spare-parts/Front-fork-bushing/translate-528.html?language=en...

Hi, after some research i came to the conclussion that the material for a KYB fork will do so i will order this all balls kits: https://www.allballsracing.com/38-6068.html https://www.allballsracing.com/55-132.html i selected on their website the parts for a 2013 YZ250, also i put those kits on...

Hi, Can some one point me where i can get busshings for this fork? i check allballs but they only have the oil seals, maybe a set from other suspenssion will do? thanks

lol i got me all excited about it... no problem mate

Can you link what bendix did you got? i'm willing to try a new bendix.