Recent content by EricP

What's the best way to remove the main, crank beaing seals and the left side bearing? Screwdrivers? Special seal removing tools? I would like to hear how others are doing this. Thanks, Eric

Hi all. I am rebuilding my motor which originated from an MC 250 and I have realized that it does not have a counter balancer on the crank. I do have a counter balancer from a spare EC250 or 300 engine handy and I am considering installing it, however, I was wondering if anyone here has had...

Updated the list with the items that are still available and revised pricing. Thanks, Eric

No, unfortunately, I am keeping the side stand for my other machine. Thanks, Eric

10/07/2011 Updated list with new pricing, see below. PM me if you are interested. *********************************************************** I am parting out a complete 2001 GG 200 EC. I hate to do it, the bike is in overall good condition, with a couple of exceptions, but I have too many...

I just took the head off my '00 250 and found the piston crown to be very heavily pitted, particularly towards the edges. There was also pitting on the head as well. Any thoughts on what this could be caused from?

Lately I have seen a lot of talk of the cylinder being to high or too low. How do you know if it is at its correct height?

Hi all, I am in the process of installing a new piston in my wife's 200. While doing this I have looked over the power valve and from what I can see, nothing stands out as being wrong with it but I honestly am not sure. Does this thing require any regular maintenance of any sort? Is there...

Hi all, I'm looking for a 6-speed trannsmission to replace the 4 speed in my 250 MC. The bike is an '01. Thanks

It does have a 19-inch rear wheel, but I was told that the motor is an EC 250. EC250 is even stamped into the side of the motor just above the engine serial number. However, perhaps you are really correct and the reality is that it is all MC 250, both chassis and motor. I am now wondering if...

I just picked up an '01 GG 250 with a MC chassis and apparently EC engine. To make a long story short it was apparently a one-off hybrid specially built for some press coverage. Anyways, I purchased the bike assuming it had a 6 speed transmission, however this weekend I took it out for a play...

Hi Steve, I need an 18-inch rear wheel, kickstand, and turbine 2 silencer (or equivalent) if you still got those items. I can come by and pick up. Thanks, Eric

Hi all, I am considering purcahsing a 1997 GG 250 EC. My initial impression is that the bike is in good condition albeit 'old'. Normally, I would't consider a bike this old but the price is pretty good and this would be a second bike for me. I currently have a '04 KTM 400 but I have wanted a...

So I have to ask, how is the riding up there in Sweden? A little different than the SoCal Dez I'd imagine.