Recent content by gassi

  1. gassi

    2012 Tall Seat or Tall Foam/Cover????

    http://www.gutsracing.com/cat-GasGas-1455.aspx Looks like they have misprint for the product name: Both seat foams are titled "seat foam tall height" but if you take a look for description, it tells that the product id 4962 is the tall height and the product id 4961 is the stock height foam...
  2. gassi

    Info on WEC round in Heinola Finland

    Komostenkyla-motocross track is the place You should go. There will be supertest in the friday evening and the enduro + extreme tests saturday and sunday. So You will see riders two times in the same lap, because the tests are so close to each other. Here is the map where the motocross track is...
  3. gassi

    2013 Models

    Guts racing will make taller seat foams very soon for the 12's. I e-mailed for them couple of weeks ago.
  4. gassi

    Another Graham Jarvis video...

    Can you do this: http://www.youtube.com/watch?v=K4qzh6YBW1Q ;)
  5. gassi

    2012 300 plastics & seat

    Hope I understand it right... I guess you mean distance between the shroud and the shroud mount inner flat surface which contacts the radiator grommet, right? I didn't have a time to take the shroud off to the bike so little difficult to measure, but I measured around 22mm. to center of the...
  6. gassi

    2012 300 plastics & seat

    You are right that the plastic is very thin where the bolt goes thru the shroud mount, I noticed it and compared it to the old shroud and there is about two times thicker plastic under the bolt head. That can be a problem and it can be too weak. Maybe I wait and see what your solution will look! :)
  7. gassi

    2012 300 plastics & seat

    I got my new EC 300 racing a few weeks ago. I think I have good idea for a shroud mount fix, I didn't have done it yet. I hope you can understand what I'm try to explain, my language skills are not so good... :o In the picture I have what I'm gonna use. First I'm gonna cut off that part of...
  8. gassi

    Around Lake Paijanne Race in Finland

    The race was one of the toughest for ages! I didn't ride it this year, maybe I was lucky... ;) Here is some articles, pictures, and videos for the race: http://enduro21.com/index.php/component/k2/item/186-kantonen-wins-in-finland Take a look for a #2 beginning 0:50 This is real "PAIJANNE!!!"...
  9. gassi

    R.I.P Mika Ahola

    This is what Mika's wife Marika say's: Mika Ahola, died of renal complications of surgery. Tragically lost their lives many times enduro world champion Mika Ahola, blessed the grave to rest in early February. Ahola died before last Sunday in Barcelona hospital ward surgery complications. He had...
  10. gassi

    Forward Bar Position

    I heard same things about the bar position and the clutch using. A couple of example what benefit you can have, when you avoid for using the clutch: If you are braking to the flat corner with the clutch pulled and in the corner you release the clutch and open the throttle same time, there is a...
  11. gassi

    R.I.P Mika Ahola

    There is a nice writing about Mika: http://enduro21.com/index.php/component/k2/item/4-goodbye-mika
  12. gassi

    Been thinking- fork swap

    If I remember correct, this my clamp is from 2009 year GG. Part number has been change after that and maybe newer models clamp had bigger OD/material thickness. Could somebody measure the lower clamp OD from 2010 or 2011 bike?
  13. gassi

    what is the stcok flywheel wight in 2011 EC250E?

    Yes there is: http://2tracing.it/ricambi-gas-gas/motore/massa-volanica-aggiuntiva-ec-250-300/ http://2tracing.it/ricambi-gas-gas/motore/volano-aggiuntivo-per-gas-gas-250-300/ Also you can use 2006 and older models crankshaft counter balancer (ME250112017) which have more weight.
  14. gassi

    2011 piston?

    A little off-topic, but can someone explain is there come changes for the EC 300's bore and stroke after year 2009? If you look technical data for year 2009 http://www.gasgasmotos.es/en/previous-models.html bore and stroke is 72 x 72mm. But 2010 and 2011 EC 300's bore and stroke is 72,5 x...
  15. gassi

    Been thinking- fork swap

    They are the cast clamps. Clamps OD is 69mm and the grooves in the clamps outer surface are 2,5mm deep. So the sachs clamp material thickness is only 2,35mm where the grooves are and elsewhere it's 4,85mm. Same measurements for the marzocchi clamp: 3,5mm/6mm. Hope this helps!
Back
Top