Recent content by Gregarious

Bump: dropping price this week. Come'n get it! I need to get this out of the garage before Oct.

Added pic and more info to original post.

sold pics: http://gregarious.smugmug.com/Motorcycles/GasGas-EC300 Bike is licensed in Washington with a street title! About 30 hours on new top-end by Tasky's Metric Cycle in Everett, WA. All of the riding I've done has been trail riding: 1st, 2nd, and 3rd mostly. Shock and forks redone...

I have a 2007 EC300 and after swapping bikes with a friend the other day I became very aware that my pegs are angled slightly down. The holes that hold the foot peg pin are worn to the point of being slightly oval. So they allow the pegs additional range of motion, but in a bad way. I bet the...

I believe the gas tanks changed in 2007 -- or at least thats what IMS told me. Someone else might be able to confirm or deny.

I'm currently running NGK BR8EG plugs in my 07 EC 300. I was thinking of experimenting with a hotter plug as all of my riding is slow single track. I thought I'd simply use a BR7EG, but no such model exists that I can find. Would a BR7ES work? I believe that is the KTM 300 EXC standard. -Greg

I was one of at least two in Tahuya last weekend -- which was a 100% increase from the week before! Looking forward to visiting Tasky's!

email sent! -Greg

NoToil I switched to NoToil and will never go back. Take out the dirty filter, throw it in a bucket of warm water with the NoToil soap, wash by hand, dump it down the sink, let dry, re-oil. Of course this is assuming the filter in question was first oiled with NoToil. Seriously, no harsh...

------------------------------------------------------------------------- Bike year & model = 2007 EC 300 Temperature (degF) = 50 Elevation (feet) = 200 Main jet = 178 Pilot jet = 42 Needle & notch = CEK (3 - middle) Air screw setting = 3 turns Throttle valve/slide = 1.5 Results...

I just thought it would be a very convenient and clean way to drain the oil into a small container after riding while still in the staging area with a warmed up engine.

Anyone know if this technique & device would work on an EC300? http://www.erider.ws/draintube.htm http://ktmtalk.com/index.php?showtopic=42667&st=0&#entry299162 Apparently on the KTM300's you can tip the bike to the side and unscrew the oil drain plug. With the bike leaned over, no oil will...

Does anyone know of a 2-finger after-market clutch lever? I'd like to keep my stock one un-altered as a replacement or in case I end up not liking a 2 finger lever. When I last ordered some parts from GoFasters they mentioned ASB (if that's the right name) might be making some.

Where you using a stock bar? If you check out this post, the author mentions fitment problems with the Hebo bar and the Acerbis Rally Pro.

Did you mount them to the stock bars? If so, which clamps did you use? I just took delivery of a set of Cycra Solution mounts, but they're really quite heavy. I haven't even opened the package yet because I might send them back. Protection vs. weight was never an issue with me, but I'm...