Recent content by gregorythomas

My 01 EC250 was leaking fuel out the overflow vent. When I took the carb apart the float pin bores were so worn i could not get the float height set properly to set it. New carb was the fix

IMS GG#1 Tank $25 for the tank, $25 for the shipping to Calif from jersey

Still have this IMS oversized tank if anyone needs it. Hate to chuck it, as Im sure someone out there can use it.

I just did mine a few days ago. I installed a Pirelli MT43 and had it go flat twice in two rides. Both times the valve stem was ripped out from the tire spinning relative to the rim. I drilled my second hole close to the hole the valve stem goes through which is almost opposite the existing...

2004 300 EC Stator, Coil I have the same weak spark problem on my 2001 EC250. Unscrewed the plug, grounded it to head and kicked it, can not see the spark jumping the gap in the plug. But I can feel the spark on my hand, not a sharp zap but a mild one. I was thinking ignition coil, so I...

Oh sorry did not refresh on the page before I posted. So were you able to just bolt the ktm stator to the GG plate and make it work? Seems like the GG flywheel should fit if the stator is the same!

From the measurements you reported looks like the exciter coil is open. I have a KTM 200 MXC that I was just looking at it's 2K2 stator and flywheel, it looks like the flywheel is too big to fit inside the stator cover on my '01 EC250 which I was comparing it too. I would think that the spark...

Rear Caliper Carrier Don't know if anyone reads these old threads but I have the same worn bore on my 2001 EC250 caliper carrier. Took it to the machine shop on Martha's Vineyard to be bored out and sleeved. Am hoping to get it back Monday to see how it works out. My brake pads were wearing...

Any update? Alster, So how did it go? Wondering how you made out with the ktm stator? I was worrying that the timing would be different and maybe that was the cause of your no spark issue.

Lighting up my '01 Don't know if people are still looking at this thread. My 2001 EC250 has something in a hole in the frame under the tank with wires connected to it. Is this a rectifier? I have a 2K2 stator and am trying to figure out what i need to do to add a horn. If this is a...

I have an IMS 3.4 Gallon Natural Color Tank for 1997 to 1999 EC250s. It does not fit my 2001 EC250 so thought I would see if anyone else can use it. I comes with the cap and vent hose as well as a petcock installed. Make me an offer. Thanks Greg