Recent content by imsimon

Great thread love following ones like this!! Good luck will you be spraying/painting/covering the clutch cover? I think it makes such a difference when theyve been done!

im on works computer that I cant get on facebook for to post a link but if you search GasGas owners group and join it!

when I got my bike the forks tops were flush with the top yoke, if you push the forks up through the yokes you get faster steering at the expense of stability, Ive ended up bang on those little marks you mention, makes sense to me!

nice jay, like it! enjoying following this! Im an admin for a mainly uk based gasgas facebook site and i'll share it on there! looking forward to number 3!

found this today, looks very interesting!!! https://www.youtube.com/watch?v=mQSscoXp2zc

hello all, I think I know the answer but I just want to check! My kick starter is starting to struggle, it seems to struggle to engage when kicking and then also doesn't return everytime. Is this two separate issues my main question is can the return spring have any affect on the engaging of...

Thank you! im definitely pulling the carb and giving it a proper good clean!

well it was a happy(ish) ending race was yesterday bike wouldn't start off the line initially got it going managed about 1/2 mile of rough running and it cut out completely, took an hour to get it back to the pits where I found a bit of dirt had become wedged in the spark plug! I guess this had...

thankyou Memphis I didn't think about that! yes the idle is ok so maybe my problem lies elsewhere, the last time I rode it was again at a track where it hardly ever needed WOT and when I did it didn't want to rev like it needed to clear its throat, I got a fair bit of spooge coming out even from...

yes it would wouldn't it! 2006 ec 250!

thanks for that, it is a bit of a gnarly technical forest event but does have fire roads in places that I could open her up and clear her out, also just make sure I use a lower gear and pop the extra plug in my pack, I normally use br8g (or eg cant remember) ive just popped in the iridium...

well that's a tricky one as I had been messing with jetting thinking that was the problem with performance for a fair while. that was also in the autumn temps about 15 degress C and now its around freezing. when I took it apart I found it had the not well liked n1ef in clip 4! when I put the JD...

just after opinions? firstly bike currently has 42 pilot, JD Blue needle on top clip, main 180 A/S about 1 1/2 out bike has recently come back from a bottom end build, on first ride out it fouled a plug, just put new plug in and I reckon just by revving seems a little rich, spooge and...

mine wasnt

yep a longer extension bar from your ratchet to socket should sort that