Recent content by Islander

Hey Folks, Rebuilding the wheels on my 18 XC300 over the winter... I would like to replace the spokes and nipples with anodized ones, but will take anything I can find. I know our wheels are a bit of an oddball and its hard to find anyone that supplies replacement spokes + nipples. I...

Moving into winter.. looking to do a full rebuild on this bike as i'm not currently interested in anything else on the market. I wasn't happy with the power at 5k+ feet, got the jetting dialed and added an RK Tek head to get by. Now that the season is over, i'm still not totally satisfied with...

Res and blue test 15.5, the other two in the 4 pin test at 99.5 like you said. The other one shows 1 ohm. Does this mean it looks like the stator is good and it's a CDI issue?

Thanks for the info. The red & blue test just as you say they should. The rest of my wires don't quite match up the same as what you described. Attached is a picture of the harness coming off the stator. I've called around and no one even seems to know what specs this stator should be tested...

Update: I had the ignition coil off, utilizing my youtube skills i think i was able to determine that it works. I had the CDI off and i bent all the pins ever so slightly to make sure we had contact... also had the connectors right off the stator disconnected. Threw it all back together, to my...

Alright.. dropped it off at the mechanic, he didnt do anything because he said he couldnt find any specs to test things too. Im back to working this out on my own... I bought a multimeter, but thats about where my electrical abilities end. How do we go about starting to test this beast?

Hey guys. thanks for the information. I'm going to have a look at it when I get home and have someone help me check some of the electrical. Parts have been a tad tough to find right now due to whats happening with GASGAS.

Hey all, I went out for a ride yesterday, unloaded the bike and fired it up. it ran for about 30 seconds and died like someone had pressed the kill switch. I was not able to get it running so i took it home and tore it apart. Upon checking everything, i have discovered it has no spark. I...

Hey guys, I recently moved and went from riding at Sea level - 1000 ft to now riding at 4500-7000 feet. I have the jetting worked out for the most part, I've played with the powervalve to have the motor come on hard in the bottom and mid. When I was out riding today, I struggled a few times...

Hey everyone, Been riding an 18 XC 300 for a few months now. I find the motor a little on the weak side. I have it jetted nicely, I followed another members jetting recommendations for sea level and it runs great. Its clean and crisp off idle all the way to redline. The jetting did help the...

If anyone is interested, I just posted a review of richards product over in the other House of Horsepower thread. I'm away until October 30th, but I'll post pictures when I get back home. -Bryce.

Hey everyone, Just wanted to give a quick write up on the product and support i've recieved from richard at House of Horsepower. I originally ordered 2 Scalvini systems, One for me and one for a local pro rider(2014 ec250 replica). I Just ordered the pipes as I had not read any positive...

I ended up getting ahold of richard from house of horsepower. He seems like a good guy, we exchanged some info. Going to order a silencer. I have parts numbers for everything I have ordered and crossed over. I'm away at work right now but ill be home august 28th. I have parts numbers for my ASV...

Hey guys, I've beem ordering a few goodies lately. ASV Levers, warp 9 pegs, going to see if I can fit the red carbon guard from propower onto my new scalvini pipe. Ordered a few brake and shift levers from hammerhead to see what I can mod to cross over. One of the only things I can't really...