Recent content by jasont1532

Looking for a silencer that fits on 05 ec300

Looking for a silencer for 05 ec300

I am looking for a silencer for my 05 ec300

My 2005 300 has over 70 hours. Still tight

i recently did the moonshine enduro and the frontend was a little scarey. 95% of my riding is local single track that i made. i will try loosening the rebound to 10 clicks. thanks for your input

yeah we did. you did a good job, but you never called to go riding! haha. i cant tell where it is really riding in the stroke except that you can tell it uses almost all its stroke when i ck after a few miles(dust or dirt on the tubes) it feels great on the knarly, slow shit. maybe i will try...

i have a question on what shims i should remove/install. i have to run the comp all the way out. right now the comp valve is: 22x.1,22x.1,11x.2,22x.1,20x.1,16x.1,14x.1,11x.2,11x.2 in the faster rock gardens it gets a little harsh feeling i use 5wt oil at 130mm .44kg springs i ride all...

i have had both and prefer the scorpion. it lasts longer and the plastic hyde wears to quickly and i still bent and smashed my frame tubes. the hyde pipe quard catches every tree branch and makes many dents.

see if the 8mm head bolts are loose my 05 300 loosened.

after 80+ hours on the skid plate i have worn through both rear corners dented the frame rails and bent the right side outer frame rail. also after 2 rides the mounting for the pipe broke but large hose clamps work. the rubber bumpers all ripped out till i siliconed them in. next time i will get...

i like the dunlop d742af for the front

i have seen and heard of people breaking footpeg mounts off, so i've been watching them. i noticed they are now bent and the lower section is getting ground down from the rocks. cant help hitting rocks. any ideas on how to prolong them from breaking off? could i add some weld to beef them up? on...

the hyde rotor guard fork guard sort of fits. had to do some of my own mounting alterations. once its on it works very well especially the right side fork guard

i run 13/51 and it works well all around especially tight rocky shit

i burned (melted) 4 rollers so far on my 300. the bike has 37 hrs on it. tried stiff hose, and made hard plastic rollers- way too loud. i think it doesnt help that i put a 51 tooth sprocket. tried to move tensioner away from sprocket, this helped slightly. i see on older models some have a...