Recent content by Jer

I have most of the electric start parts to convert your bike to electric start, starter motor, ignition cover, starter gear, bendix, etc. all oem gas gas parts with low hours. The only thing you would need to complete it is to modify your wiring harness and possibly a power valve cover. I also...

Okay so for what I?ve read in the past forums what I need to do is float my ground. I see that there is two options, other you can float the ac ground or isolate the DC ground and have all grounds on the battery. I think floating the AC ground is the better option for me because the starter...

Alright so I?ve got my starter working somewhat but I?ve encounter a few problems. I took all the electrical stuff off my dad?s ktm 300, including the reg/rec wiring harness relay and battery. I have it just sitting on the bike for now with the stator wire going to where the stator wire off the...

Okay I see, I?m not sure what stator I have as I?m not sure how to tell but I?ll attack an image of it in case that helps. My dad has a 2009 ktm 300 that has had the e start deleted so I can probably use the regulator from it I?m assuming? I didn?t have time to fully look into the wiring on my...

The wiring diagram would definitely be helpful. The little box is the only electrical thing I got other than wires, I?m not to sure what it is but maybe it?s all I need?

I bought myself an electric start system for my 2008 gas gas ec200. It is complete aside from some wiring. I have some of the electrical for it but not all of it and I?m wondering a few things about wiring it in. Can I run power straight from the stater to the battery to charge it? Or do I need...

I?ll have to borrow a voltage meter and check

My ac/dc converter from Amazon came in and I installed it on the bike along with a new LED light. The light works great. Very bright and only minimal flickering at idle (about the same as my old light). Only odd thing is that the light shuts off if the bike revs really high. I?m guessing at like...

Those are both beautiful! Great job on them. Makes me want to fix mine up even more.

One day I?ll get a new bike but I enjoy tinkering and fiddling with my 200. I?m still faster than all my friends so I have no reason to upgrade plus I have a bike that no one else on the trail has or even recognizes:) I think I?m just as happy putting the money of a new bike into this bike...

I can?t find a starter gear that will fit my bike so the only way I can get e start is by waiting for a used one to show up. I already have the led light and I just wanted to get it working in the meantime since it will probably be months before I find a gear. Then I can just re wire if I?m able...

I won?t be connecting a battery. It just has to run the 10-30v led

Maybe, but I?ve rode newer ktms and I?m yet to find a bike that I like more than this 200

I?ll keep looking for a gear but I?m the meantime I?m going to get an AC DC converter from Amazon. I ordered this one for like 20 bucks. Hopefully it works. The light I?m using is a 10-30w it says. Step Down Voltage Convertor, AC 10-28V to DC 12V Buck Voltage Regulator Waterproof Power Module...

I?m working on collecting all the parts to convert my 2008 ec200 to be e start. I?m able to buy everything from cpd or eBay other than the gear that goes on the flywheel. They have the gear for the newer ones (2014 and up) but I don?t think it will fit mine. Correct me if I?m wrong. Wondering...