Recent content by Jimmy

Yea, ive been thinking as well, i think i had a bad connection with my white wire.. but hell its working now anyhow :) Skickat från min iPhone med Tapatalk

Yep swappped, yellow from stator to r/r, and white to original ac reg Skickat från min iPhone med Tapatalk

I sorted it! Woho!! I changed from the white wire to yellow wire from stator, now its charging.. atleast staying on 12.4v when lamp is on! Thank you so much for all the help! Your awesome Neil E!! Skickat från min iPhone med Tapatalk

Very strange tho my rectifier is brand new. I will try with a 35w lamp and se if it still drains the battery. Cause as it is now, with only the 40w led.. its draining fast even when im driving and have high rpm.. im sure ive done something wrong here.. but it sounds so easy. White wire to r/r...

Im to novice on this, i think i must leave it to someone that knows more then me. I changed my battery, still doing the same... so the one i have is a half way? How do i know if its a halfway or a full wave one? Even when i put a 35w halogen lamp on it, it still drain my battery.. and a big...

I havent looked inside the stator, but all wires from battery is new, the rectifier is brandnew. Ima go thru everything again, remove and clean my earth point for the r/r. I will even change my switch to if thats a bad one. Might be my lamp thats to strong, but a orginal 35w halogen.. how many...

Yea, but a 40w led should not be more then 5amp right? Might be that the lamp is pullibg to much then cause my volt is dropping fast on the battery even on pretty high rpm. I need a new light i assume then... my battery dropping fast dom to 8-9v When you say feed the r/r with white cabel and...

So i have to open up my stator och do the floating ground thing you talked about? Skickat från min iPhone med Tapatalk

My issue is that when im running my bike without using my led, its charging around 16-17v!? But as soon as i turn it on, the V is dropping fast from the battery. Skickat från min iPhone med Tapatalk

Is this the right way to do it? Would love some help.

Heya, i would love to know this as well, since the owner before me rounded it..... Whats the best way to get it out? I have a other baseball laying for to be used, could i drill this thing out? This sucks! I wanna ride! This is the bottom nut, for the compression... Sachs 48mm

Hello! I would like to put a battery on my bike, i have the holding thingy for it, right above the air filter. But what do i need to do? A AC-DC converter and a regulator before the battery? And after that new cabels to the lights? I feel that the mainlight is very low, extremly low tbh. Any...

Heya again. Ive been looking around and trying to find the factory recomendations for my front suppension. So my question, what is the recomended clicks? And do i close it clockwise and then count the clicks? The bike is a 300ec 2012

Since the manual is so damn awesome..... (Not) Could anyone please tell me the recomended factory settings for the forks? Rebound and comp... And a quick how to ;) Ive read and heard that you should turn it in completley and then count the clicks from there, is that correct? Sorry for all...

Thanks alot for answear!! Its awesome! Im out and gonna try fill everyrhing up with oil now, without destroying anything ;)