Recent content by johnm

Work required is similar but different. The floating AC requires the generator removing and modifying. This allows the existing grounds for lights to remain in place. Floating the DC system, does not need any mods to the generator side of things. But the whole DC system needs the earths...

Go on the Spanish GasGas site and look at the download manuals. The later manuals after about 2006 have wiring diagrams on the last page. The wiring is just about the same for all model years.

Several months down since I converted and I have a 60 watt headlight, which is run all the time the bike is running. The bulb intensity does not vary with revs, even on a fresh start up after a couple of days, the battery stays charged all the time, so the system pumps out in excess of 60 watts...

Looking at the wiring diagram from the link provided, the headlight looks to be regulated AC, the tail, brake lights etc seem to be DC. So not a full DC conversion.

EC200 with Tempa Flow 2000 EC200 Location: Singapore Altitude: sea level - but using correction tables due to high humidity works out at between 0 to 500m Temp: 26 to 35 deg C Oil ratio 50:1: Mobil 1 Racing 2T 98 unleaded pump gas Pilot: 38 Main: 172 Needle: JD Red #2 (from top) Airscrew 1...

I had a rich bottom end and doing searches I came across the solutions below. The slide change worked for me, cleaned up the whole bottom end, couldn't even get it to idle for very long with a 35 pilot and air screw nearly 4 turns outs. With an 8 slide I had to increase to a 38 pilot and have...

Tp answer the questions with respect to the earths Difference between floating and non-floating ground The original system is a frame grounded AC system, the ground before regulator and after is common; because the system remains an AC system, this is ok. One side the generator is earthed to...

Lights next Thanks guys. Looking for better lighting next - possibly a Ricky Stator 8", with dip and high beam.

Hi all - first post Just bought a zero mile/hour 2000 EC200, had it a couple of months and have got fed up with dim lights and indicators that do not function with the lights on. So did the DC conversion without floating the ground. Parts used Trail Tech regulator/rectifier Trail Tech...