Recent content by jt633

Has anyone removed the e start components on a new gen reiju 250/300? Trying to save some weight and don’t need the electric start but I could benefit from a flywheel weight I’m assuming they don’t sell one because of those electric start drive gears?

Want to buy a trusty powervalve cover that’s adjustable or if someone has one they would lend me to 3d print to make a replica and return 250/300 model thank you

Looking to buy a ec200 or a 250/300 for a winter project in Pennsylvania or the tri state area xcrider633@gmail.com

Price reduction accepting best offer

So when I began i lowered the clip and raised the needle I was in the middle when I started moving it down helped some but not enough I'm going to investigate reeds. Currently at bottom position on the needle, cek needle and 8h slide

Hi guys I have a 2004 ec250 with an rb head rb carb and ported cylinder. The bike is jetted almost perfect nice and clean not rich not lean no spooge at the silencer the bike has a weird flat spot in the end of the bottom mid range it's always when I'm on the track needing to be on the pipe in...

I have a set they are in excellent shape oem graphics peeled off from sitting so long 60 shipped?

Selling a good condition WER stablizer stamped ktm but it was mounted on my 2004 gasgas ec250 asking 200 probably needs new oil it has been sitting a while

Do you have a2004 red rear fender? Or a 2004 powercore silencer

Looking for a power core 2 for a 2004 250

Did you have to modify it at all or was it a direct bolt on? I read on here that someone said the 2001 rm 250 pipe looks the same as the gasgas I'm gonna get one and try it the pro circuit works and long silencer is my goal

Looking to buy .48 ohlins 46mm fork springs and a shock spring for an ohlins shock from a 2004 model for a 215lb rider without gear thanks! Xcrider633@gmail.com

Hey everyone I was wondering if any of the jap pipes will cross over to an 04 gasgas 250? Will a 94-98 kx silencer work? I want to put on pro circuit stuff. And I happen to have a 2015 yz project going on thought it would be cool to put the gasgas motor into it while the motor is being built...

Here is my dilemma. The bike had absolutely shot ohlins forks that had issues and needed the lower tubes coated. Also the bike came with a set of true works ohlins forks but the wheel spacers didn't work and we cut them down only to have the fork bind up and not work properly and I happened to...

What year bearings would I need? Would the 2009s fit the 2004 wheel?