Recent content by Larsa

I will read more later many thanks to you all. The spark plug looks almost perfect. It is the org spark plug Denso W24ESR-U Now I have changed spark plug and put in an NGK B8EG. I am thinking that a BR7EG can make it better?

What can I then do? On my GP300-18 it was as org one .3 gasket. And all older GasGas 300 that I have hade did have 3 gaskets .15 .30 and .5 The highest octane you can get in Sweden is 99 octane that is about the same as USA 93. When I was using only the .3 gasket the engine started to ping...

2018 GP300 sea level in Stockholm Sweden. 99 Octane it is Sweden so it is not the same as USA RON it is lower. 2% 50:1 Motul 800 Full Synthetic 20 Celsius 68F and a little rain Needle NEDW#1 at the top, Main jet 168 Pilot jet 40 AS 2 turns out. Float lever 2mm lower then org. Sparkplug denso...

Great news my next enduro will not be a KTM https://enduro21.com/index.php/40-general/4829-rieju-to-manufacture-former-gas-gas-enduro-motorcycles...

Hurry I think this year will be the last year for GasGas Enduro.

No I think Gas Gas enduro is ded. And for a short time they will use GasGas and KTM brand on trail bike. Then after some years they will take away GasGas brand and become KTM trial bikes. I now how it works I have been working at Compaq. It cost a lot to keep up a brand name.

KTM buys 60% of GAS GAS!!! https://auto.economictimes.indiatimes.com/news/two-wheelers/motorcycles/after-husqvarna-ktm-adds-spanish-brand-gasgas-to-its-kitty/71317444...

I ask the importer here i Sweden. And he told me that it was not possible to add a map switch to 2018.

I did think my start button was broken After 15 hours and the first time on a MX track. My start engine started to fail. Some time noting happens at all when I pressed the start button. So contacted my re seller go get the modifications. I did get new power cables bigger battery and new FW to...

If I look in the user guide to Gas Gas 2018. Page 56 1. motorcycle without load and with the side stand out: There should be a space of 30 ~ 36 mm. between the chain and the swingarm in the rear area of the chain guide. you can check with your fngers, but without overly forcing it. 2. Loosen...

We have to wait until CET 18:00 We have to wait until Central European time 18:00 :eek: https://gasgas.com/es/

It will be realsied 17-July I have read that 2019 models will be released on Tuesday 17-July

My standard EC300-07 mod to Sixdays-09 conversion I was tired of my EC300 2007 and rebuilt it as an Sixdays 2009. I bought white plastic kit from polisport to gas gas 09, Fork protection Polisport to KTM, Sticker kit to GasGas 2009 Sixdays and a black Head light. Then I extended the life of my...

The signal horn is to close to front fender Moving the signal horn Drill 13mm hole in the horn holder

I did mail the manufactor in Taiwan and they replayed:) The resistor R1 is 0.5w, 120 ohms But I found that the lights diode also are ded:( And I am almost 100% that the diode is https://www.elfa.se/en/led-62-62-mm-red-everlight-electronics-30-01usrc/p/17507163 I will buy them tomorrow and try.