Recent content by Marc

put in the n3eg on the second clip on the stand it is running clean. I will take it out to the track this weekend.

I cleaned up the carb again and put the CEK needle back. Double checked the float. I fired it up and its not studdering mid throttle. I plan on putting the N3EG back tomorrow and see if the symptom returns Current set up Slide #7 Needle CEK Clip 3rd Main 178 Pilot 42 Air Screw 1 3/4 turns out

Everything is the same as it was minus me changing the needle. I went out earlier and moved the clip however I get the same stud-er at about half throttle. I will try installing the old clip and see if I get the same results

I recently changed out my needle from a CEK to a N3EG and I noticed that I have studder in the upper mid-range under hard acceleration. I pulled the plug and looks to be running a little rich. No real issue at low RPMs Do you think that I need to raise the clip? Here is what I got Temp 45...

It may or may not belong here but a majority of what the guy says is true. You can bury your head and hope it will go away but it will not.

I am very interested. What will be the format and how much seat time per bike? 5 hours would be a long drive just to spend a couple laps on 2 or 3 bikes.

My dealer is riding the old guy group with Ferdette. Brian Storrie is a good guy and still damn fast

My local dealer is one of the first places I go but they buy directly from GoFasters. Gofasters is a great company. Matter of fact just got a shipment from them yesterday and will still use both. Face it guys one of the main reasons that Gassers are not more popular is that parts are not...

Just a heads up but I was ordering parts for my KX on rockmountainmc.com and just checked to see if they had parts for my Gasser. Well its not much but they have now started carrying some parts for the 2011 gasser and newer. Its not much. Brake pads and chain rollers but its a start,

I emailed him over a week ago and never got a reply

Sweet thanks for the info

I broke my lower pipe mount and looked on the cross over page and did not see a crossover for the lower mount. Does anyone have suggestion for something that will work? Thanks, Marc

Scar13, I can probably help since we ride the same series. close to the same height but you have 30 pounds on me. I have a ec300 and I also have a kx450f. Both are set up for the trees and I race and ride both. The funnest to ride by far is the Gas Gas 2 stroke. Its power is so fun and it is...

Row 37 I hope that R word holds off until we are done.

The article "US National ISDE Team readies for Six Days" That is my local dealer and his son in that picture. Brian is a great rider and dealer.