Recent content by mitinsky

I did this - shortened the right hose, and installed a temperature sensor in the left hose.

Workshop manual for GAS GAS EC300 / 18-19. English https://drive.google.com/file/d/1ODPNVnjzlfq7GlTctpAvjRCziImtl2G7/view?usp=sharing

I doubt global changes ... The run is 20 hours and there have already been cases when the starter was idling on a hot motorcycle. It also did not start at +2 Celsius, but then I think the problem is in the battery.

I also think it's about the battery. It starts with a kickstarter, it will work for a couple of minutes and you can start it with a starter.

I have a Rieju MR300. Great bike, I rode it for 20 hours. There is a small problem that I cannot fix - when switching to rain and vice versa, idling rises, as if the throttle is slightly open. If you start in cold weather, then also high revs. I don?t know what it?s connected with ... The stock...

I understood everything, thanks to everyone.:)

What is this hole in the cover of the ec300 2018 generator for? A friend of mine took off this cover and saw water and traces of rust inside, he wants to seal it so that no water gets in. Should I do it? Possibly water gets in from above through the seal ...

The motorcycle was available. The cost for the course was approximately $ 7500

Friends, because There is not a lot of information on the motorcycle on the network, I want to share useful information from myself ... I found out from the pictures on the Internet that the resonator on the Rieju is the same as on the Gas Gas GP Enduro from the 18th. Accordingly, the protection...