Recent content by okay_GG

Hi, recently bought a ec300 2018 ISDE. This had a odometer with only 920km on it. Further investigation showed a broken speedo sensor cable. The bike has been used intensely, I suspect. What mileage can be expected to be regular? Please share pictures of odometer as proof ;)

Hey farmerj, thank you, lots of checking to do. will check

really geeting fed up with this issue. still does not want to turn over. It seems some binding somewhere, so I disassemebled the complete stator cover, leaving just the starter gears in (the one where the startermotor lgoes into and the one with the pinion for driving the bendix. that moves...

Hi, Thanks for the swift and extensive reply. Tried to upload a (bad quality) pic

has anyone ever experienced a worn down bendix fitment on the stator side? (opposite of the bendix cover, that is) I'm a bit worried about this, there is no bearing and I think I feel some lateral play in the bendix. If a bedinx cover solves the play on one side, you still have the play on the...

I did the AS3 conversion, but saw the old bendix cover was off centered, so I want to replace the bearings of the starter shaft as well.

is it tomorrow already? very curious to learn what you did

Having seen all the posts and replies on the Guzzidiag / ECU tuning/ TPS reset questions, allmost everything is clear. the only thing is, Where do I hook the cable up on the bike? Is there an interface, or do I have to tap off somewhere? PLease help, as my FSE 450 2005 sometimes dies when hot...

Where and how to connect the cable for guzzidiag Nice a very late reply on this thread. Having seen all the posts and replies on the Guzzidiag / ECU tuning/ TPS reset questions, allmost everything is clear. the only thing is, Where do I hook the cable up on the bike? Is there an interface, or...

Hi, In my Fse 450 2005, one of the former owners modified the routing of the crankcase breather. It now runs from the original crankcase via a T junction, which combine it with a breather tubefrom th camshaft cover to the airfilter box. Standard this will go directly from crankcase to airbox, i...