Recent content by SECRET_AGENT_BOND

Hi gasgasman, where did you get those 2010 plastics? I?m looking everywhere in the internet and the newest I found was only 2009 :mad:

Oh, you are from UK, I´m sorry, but I thought that you are from the states... So I´m not interested...

Thanks Ok, so I am interested in Gnarly Pipe, what is the price? Can you post some pictures, gasser250sm?

.... or for EC 300 2006?!? At FMF site is different gnarly models for 1999-2002, for 2003-2006 and for 2007-2009

I have same year, same ignition and have same problems. I cleaned every connector, changed regulator for 100% functional and nothing helped. The problems was that at higher rpm the power circuit(for lights,speedo and turning signals) get voltage down to 3 or 5V and lights started blinking...

Yes,you´re right and I have ordered wrong needle :mad: This table from sudco is in many sites, so I supposed that´s correct info... Never mind, I´ll be first one who tested this needle in Gasser :)

If anyone is looking for CCK needle, take a look on N85E needle from KTM 250-300 sx/exc year 98 . Same needles, but KTM´s is OEM :)

My friends fixed it with buying new 07 pipes, because Czech Republic Gas Gas country importer said to him that he "fabricates some problem in the place where isn´t and that´s all, complaint denied - no one has same problem-only you. You already paid and in problems after we are not interested"...

gasser> You are genius, you solved our problem!:rolleyes: Yes, the fork will compress further, but maximally for 10mm. I have also Gasser with same fork, and fully compressed means, that there is about 10 mm reserve from bottom edge. And I don´t think that we have to add 10mm,cause this problem...

These photos were made with removed springs and fork doesn´t look like it is deflected or such... As my friend ordered new pipes in the USA, they already know about this problem. I think, that Gas Gas knows about this problem and change every 08 pipes to 07 in the USA, because it is it´s biggest...

I know, that he got with his bike two pipes- one was for stock closed power to 5kW or such? And second one normal for full power... If any of them have a catalyc convertor I don´t know... First one was fine, but second one-normal 08 pipes are in the photos...

The problem is in the pipes - everybody who want to drive safefully must buy pipes from 07 model or some FMF or such. We solved this problem with ordering different pipes. This is only warning that Gas Gas made huge mistake and don´t solves it. As we called to the USA, they knew about this...

Yes, because you have 07... this is only 08 problem and I heard only about EC300 non R versions that have same defect.... R versions are fine, without this problem...

Hi all, I write from central Europe, from Czech Republic-we have here very very dangerous problem with brand new Gas Gases model year 2008. The problem is in the pipes and front wheel-when you push front wheel about 220mm of its suspension, it begins to collide with exhaust pipes-as you can see...

Yes, i think i should certainly buy the new spark plug and needle N1EF, then I´ll see what to do and I will discuss it in this thread, for sure. Thanks lot for advices.