Recent content by Selvagem

Immediately change the oil of the gearbox. Oil contaminated with water attacks the separator discs, that rust and contaminate the friction discs. I could prove this on Saturday, my neighbor who has a YZ 125 had problem with the clutch, dismantled and checked the records, everything was in the...

Excellent explanation. I agree 100%.

That climb in the 1st video, which starts at 3:38 must have been really cool!

I think this is one of the few advantages of being a stature of this pilot is (1.65m), unable to sleep well on the bike. I realize that high pilots usually use the extenders on the handlebars, which in my opinion is a big mistake. I suffer in some situations due to my height, but not for that...

Thanks! Brapp!

Thank you for your help. Actually, my clutch works superbly, always used Motul TransOil 10W40. But out of curiosity, the way to verify the disks is as described in the manual? Checking wear with the caliper? Any idea what material supplied by Barnett is the most appropriate?

Yes, it was very cool! I hope to repeat more often!

Exactly! Great pilot and an exceptional person!

On the last Saturday gave me to pilot all day, went to the region where live a friend who is an excellent pilot, which has a particularity ... he is deaf and dumb. He steers his KTM EXC masterfully, never seen anyone drive so good one Enduro motorcycle, he mastered many Trial techniques, and...

I'm programming the exchange piston my GasGas EC 250 2008 for next days and would like to take to perform a check on the clutch discs, which are still the original and the principle are working perfectly, because I do not see any strange symptom, my clutch does not slip, do not give leaps, no...

Which year of RM 125 CDI is compatible?

Our economy is really bad. Do this for yourself and adjust in the Squish band, it will have a new bike at hand! Dilvo is an excellent mechanic, extremely competent and honest, guarantee a perfect servisse.

Good news, with the cylinder in good condition, having changed the bearings, connecting rod and piston, your engine will return to work in optimal condition.

I wonder what horrible noise produced when its engine running....The cylinder has not been damaged?

Also I've been through this situation. In my case, I first installed the carburetor in its proper place on the bike, done that, with the help of an inclinometer, checked the result. After this, I adjusted the float level in the same inclination that I have when the carburetor is installed. To...