Recent content by stainless601

Idle The base idle can be changed by turning the brass colored screw on the throttle body. The screen is in the injector. Remove the tank, remove the fuel line to the injector. Look in the inlet port of the injector and clean that screen, if needed change the line. Hope this helps.

Cuts outta idle You can bump up the idle but I've found the fuel lines deteriorate and the screen in the injector needs to be cleaned as well. Just as a preventative measure, and no cost.

Some Parts found in the depths of dark corners. These parts are new factory GasGas FSE 450 2003-4. Except the CDI is used and known to be good. 2-clutch kits 3-injectors 3- shifters 2- brake levers 1- starter 1- starter that does not fit FSE but with brush modification could work...

I will open by saying that I maintained 14 of these machines used daily over the period of 3 years. I have seen and fixed everything you can imagine. The starting issues are various but can be overcome. You need 1- Strong fully charged battery 2- Clean Spark Plug 3- Good Starter Motor The...

Fse 450 I've got a brand new in the package fuel pump and injector should you decide either has failed. Pm me I have loads of repair experience on that model.

They are made by Magneti Marelli # WF1024 I just happen to have one new in the package along with a new fuel pump. Give me a PM.

DP Clutch kit includes all steel plates all friction plates all springs will ship in the US $80.00 DP # 1131-0144