Recent content by thingymijig

Thanks mate, sorted the problem now thanx (timing issue ) see you at whaddon ec 250 # 550 Matt

Still rich Thanks for the reply Brian so by this i think i shoulld put the clip on the top cut away, as it seems to be missing and spluttering still (too rich ?) even though the jets and needle are quite lean ? and the air screw is out 1 1/2 turns. Would changingh the slide from a 6 to a 7...

I ride a 2002 250 EC Can anyone tell me what the clip position actually does, The manual recommends my set up in the central position. What effect does putting the clip higher or lower have ? My settings are Needle N1ef main jet 178 Pilot 38 slide 6 altitude 300 ft above sea level Does this...

Ive got an ec 250 2002 Iam wanting to change the rings and clean the piston, I have remved the water connector and the six hex bolts, removed the cylinder head.....now i dont have any idea what i do next so i can get the piston out . Also is it usual for the top of the piston to be black with...

Thankyou Thanks for taking time to reply Jeff, everything is much clearer now. I will take all your advice, and think about aquiring an LTR kit (if they ship to the UK) Thanks Matt

Apologies I am from the UK !!! I thought I would ask the experts > I have a 2002 EC250,..Ineed some help with settig up the carb, I live 300 feet above sea level I am currently running all stock needle and jets 178 high and 38 pilot. In my manual it saysthe throttle valve cutaway is 7 what is...

Newbie Ride a gas gas 2002 250 ec in the TBEC, first two stroke Ive owned, live in watford Herts Any one got any goot jetting set ups I`m currently using a stock needle top clip, 178 main and 38 pilot, not sure what LTR enven means, I keep reading it and dont know what the throttle valve...

problem solved Thanx guys, it was the chain bit making the noise, thanx for the manual down load, I will investigate the needles, it may be this causing the problem. Great site

Thanks for your sdvice, I will have a look, and Idea on a pdf nanual for the 2002 ec250 ?

I am a bit new to the enduro bikes and two strokes, I just picked up a 2002 ec 250 and i have noticed a rattlle from the engine, and it seems to have flat spots Any Ideas ? could it need new piston and rings ? Also I need a manual for servicing and parts, I cant find a down load. the gas gas...