Recent content by ucrtwf

Bike 2010 ec300 Rb carb mod When I. Go over whooped out trails my throttle sticks open. On the flats, everything is fine. A buddy said the slide should be replaced. I've been looking, I can't find which one to buy. Jd jetting has some, but don't know which number to get. Any thoughts ? Carb...

Now we're all in trouble.

Thanks Glenn, Just to be clear, there are four hoses coming out of the carb. Two point up, two point out to the sides. Right now I've got the two pointing up- going up and over the slide cap and down. The two going out to the sides just come out and down. Do you mean route the hoses up...

UPDATE- I went riding for a bit yesterday. The bike ran lean. I had the air screw ALL the way in, still at sustained throttle (half throttle or more), it would lean out. Also a new observation- a couple times when I would go over a mild jump, it would bog for 5-10 seconds after landing...

Hi Guys, I've looked and looked through all the float adjustment posts, lean conditions, etc. I can't find one that matches my bike. ('10 ec300, with pwk carb) It did this before and after the RB carb mods. Here's the issue- When I'm going up a steep hill, my bike fluctuates in RPM with...

I've been riding for 35 years, thought the ec 300 would be perfect. In my opinion, the four strokes still have the edge on power modulation. That being said, my '10 ec300 is a good bike, but I'd be looking darn hard for my new one... when it happens. It's not as easy to work on, or seem to...

I'm going to try to get my '10 EC300 plated in Illinois. I looked on the DMV site and it says no 2-strokes. I'm not sure how or if any of your guys make this work for you, but I would love to find out how. One thing I have going for me is that the title I have to switch over is from Oklahoma...

Did you get the entire kit, or just the tail light kit from Sicass? How did it fit? I'd love to make my 300 street legal, but the DMV in IL says can't.... still I need a tail light to ride in some dual sport rides.

I work for SKF and have a hard time getting a hold of the Fork Seals. All the seals in the US come through one point (MX tech suspension). I know he sells 'em to other places, but if you're having a hard time getting the seals, I'd start there. Good luck!

I've got about 20 hrs on the RB mods (squish optimization and carb mod). I have to agree with everyone, more lower end easier to adjust the jetting, no draw backs to date. I'd recommend to anyone. Ron got my parts on Friday, and had 'em shipped back to me the following Monday. He must be...

Wow, cool helmet cam look. Thanks for sharing.

Thanks guys for your thoughts. The difference between the rebuild and magura is about $100. It might be worth a hundo for the piece of mind, since yes- the bore looks shabby from the factory- and who knows if the metal pieces scored it. Take care, Tim

Hi Guys, I've got about 20 hours on my 2010 EC300 (bought it in Nov. with about 20hrs on it). Anyway, I've also got a Rekluse Core EXP on it. The clutch lever never has bounced back quickly when released. About 10 hours ago it started dragging, even with the lever pulled in. I back bled the...

Rad guards fit, but (on my 2010 EC300) pushed the ends out so they wouldn't plug into the radiators, zip tied now. Kind of cheezy.

Will it make me a better rider? I've got some tough competition. Rock ledges? Nasty trails in Co?