Recent content by Ud_luz

  1. Ud_luz

    My Stark Varg, new in box

    I have a bit over 100 hours on my Stark. In all honesty I have no desire to ride my gas bikes again. Need to keep them for riding long distances though.
  2. Ud_luz

    2024 models released

    Same on my '23 Pro.
  3. Ud_luz

    2023 Rieju 300 factory jets.

    I was surprised, a 170 and a 40 PJ. I installed an NEDW but curious what I should jet at say 9,500' Thanks.
  4. Ud_luz

    2024 models released

    My '23 Mr Pro has the choke on the carb even though the master has provisions for the choke lever.
  5. Ud_luz

    New 2023 GasGas EC300 owner

    It's a red KTM. Thumpertalk or ktmtalk.com. Congratulations on your new bike. :)
  6. Ud_luz

    MR Pro 300 springs.

    Oops, I meant 44 on the forks, not 54. I'm 205 without gear. Jeez, might as well put 2x4's in with 54 springs. lol
  7. Ud_luz

    MR Pro 300 springs.

    Just picked up a '23. I weight around 205 so I'm figuring 54 N/mm for the forks. What's a good # for the shock? I looked at the owner's manual which claims a 4.4 N/mm but that doesn't seem right. Who's a good source for the springs? Thanks.
  8. Ud_luz

    2022 MR Pro 300.

    Debating on the Rieju or the Beta 300RE. I gave my son my '20 300RE which I really shouldn't have.
  9. Ud_luz

    2022 MR Pro 300.

    Any issues? Starters fixed? Thinking about going back to old school. The KTM is great but even after converting the wretched xPlor forks to standard OC forks, the Sherco is 10,000 times better with the KYB forks.
  10. Ud_luz

    2007 ec300

    Hi, fellow club member. I'm waiting to hear back from one guy. I'm out of the country now until the end of March. PM me your name and I'll let you know at the next meeting I can attend. Later, Bill.
  11. Ud_luz

    2007 ec300

    I have no clue why some of the pictures are large.
  12. Ud_luz

    2007 ec300

  13. Ud_luz

    2007 ec300

    2007 ec300. Sold ( wife gave it to our grandson). Decent condition. $1,500 or best. Street title. Original plastics in box pulled off when new. 2k3 ignition. Rekluse Z-Start. Skid plate. Hand guards. Guts tall seat. GPR mount. New wheel bearings. Newer tires. New brake pads. Fastway pegs, one...
  14. Ud_luz

    GasGas, New Investors

    KTM is starting to remind me of the Borg. I too think this will be the end of GasGas as a unique bike. Red KTM likely will be the future. :(
  15. Ud_luz

    WTB 2007 EC300 inner clutch hub.

    Had an old Z-Start in mine and want to go back to stock without having to shim it up. It's even worse since I want to use the CR250 plates too. Thanks.
Back
Top