Recent content by VintagePhill

  1. V

    2018 GP300 Crank Big Needle Bearing

    Thanks for this Tip, for anybody searching, the crankshaft is a PROX 03.1315 and fits 200-250-300 2T from 1997 to 2020. Sadly the Dimensions of the lower big Needle Bearing are unique (maybe on purpose) and cant be bought elsewhere as far as i could tell. (Dimensions...
  2. V

    2018 GP300 Crank Big Needle Bearing

    If the rod and Pin are still in good shape I'd just change the bearing and be done so my thought. Are there any implications to this idea if no visible wear is present?
  3. V

    2018 GP300 Crank Big Needle Bearing

    Hey Guys, Does somebody know the Code and manufacturer of the lower main Crank needle bearing for a 2018 GP300?(See picture)I want to rebuild the crankshaft myself and don't need the crank and main shaft contained in the set. Thank you guys!
  4. V

    GasGas GP300 KYB Fork Stiction Issue

    Thanks for the Tips, sorry for responding that late. I was on a Weekend Enduro Trip and had hoped the suspension would maybe break-in. But no, its sticks like before I rebuilt it. I tested the forks after installing the new bushings and Seals. The Forks weren't even mounted in the Bike. My...
  5. V

    GasGas GP300 KYB Fork Stiction Issue

    Hi Guys! I am having a bit of trouble with my KYB Forks on my GP Edition. My Dad recently got a 390 Beta 2022, which also uses the Kayaba 48mm Suspension. While testing his new Bike I noticed that his Forks had absolutely no stiction while riding. The slightest compression while sitting on the...
  6. V

    GasGas 2018 E-Start vs new Rieju E-Start

    Hi Guys, Where should I even (e)start... 2 Years ago i got My 2018 300 GP Edition and the E Start never really worked. Up to this point I tried every single Idea you guys posted in this Forum but still, it didn't change much. A few months ago I was on the brink of selling my GasGas out of...
Back
Top