Recent content by Wellsy

Just wondering if you'd be interested in meeting somewhere in between Loveland, CO and Lewisville. If so, I'd be very interested.

I have an 05 ec250 and I'm looking to get a newer bike like an 07 or newer GG 300. My thought was that I'd take the parts from the 05 and transplant them onto the new bike. My question is which parts would cross over? I have ohlins forks, I'm assuming these would cross, but there are a ton of...

I'll take them if they'll fit a 05 ec 250. Just let me know what the shipping cost is.

I spoke to Mark this morning and he's working to get it taken care of. It was suppose to be an upgrade but it's gone wrong some where.

Conclusion OK, after this whole week has been spent on the bike I was stumped - there was a crack in the fitting that goes into the master cylinder under the other one so I couldn't see it. It finally broke all the way. Ordered a new one today and learned a lot this week about the clutch and...

Yep, the bleeding procedure worked! Problem now is that the leak is still there from the reservoir to the cable. Thanks for all the help.

Alright, this is turning into a nightmare. The fitting on top of the banjo bolt was seized, so I took the fitting and the banjo bolt off of the slave cylinder. I was able to get the two apart, but now I'm having a hard time getting the banjo bolt hole to line up with the collar hole. Still...

Thanks for the input GMP, I’ll give that a try tonight when I get home. I was also wondering if the leak in between where the clutch hose connects to the reservoir is a common one and if there is anything I need to do to ensure it doesn’t leak once I get it back together. At angles it seems...

I need someone to help point me in the right direction as to how to replace my clutch fluid. It was leaking up near the handle and I have that fixed (I think) but I lost a lot of fluid in the process. So I drained it but I can't seem to get it filled. The bike is a 2005 ec250.

Jason is a top notch guy! I bought the pipe guard and bolt kit from him and when the pipe guard came it had a nice air filter in there with it!

tm enduro, I agree completely and am looking to do the same thing with mine. I love my gasser with the only exception being the plastic - seems flimsy. I think that green would look awesome! I've seen where the parts cross over says for the front fender - 97-01 KX and the rear says 94 - 98...

The wife and I signed!

Wicitup, I don't have any on my current bike, but I will as soon as I scrape up the cash. I bought the Power pegz which are the same thing only don't spring back to center. I guess the spring isn't that great on the pivot pegz. I had the power pegs on my last bike and loved them. I sold that...

I've checked the parts cross over sheet and it says that a 97-01 kx front fender and 98 kx rear fender fit the GG. I'm just wondering if that applies to the 05 models as well. The other question I have is it doesn't say what shrouds if any cross over? I'm trying to get all new plastics for my...

I just price checked with just gas tanks vs gofasters, gofasters is cheaper with a Clarke tank at 170.