Recent content by welsh.Z.S.

Thank you buddy

Bump

Hi guys , I'm going to be buying a new seat cover soon and I'm torn between red or black, does anyone have any pics of a red seat cover fitted to a 2018/19 gasser please ?

Hello guys , I've got the black insert (high high compression) on my 21 rieju 300 (S3 racing) , does anyone have any jetting setups that they have used for this ? Bike is all fresh , recent top end , about 300 meters above sea level and running 98 Ron fuel.

Yeah he's running it in rain mode .. I did think about making things richer for him but the problem is he's a slow rider so he'll be fouling plugs all the time 😂

My mates recently bought a 2010/2011 ec300, and it feels a lot more motocrossy compared to my 21 rieju 300 , I've changed his jetting to nech needle etc and it runs a lot cleaner now , but it's still too much for him for hard enduro .. Any other mods we can do to it to help make it smoother for...

Hi , I'm not sure what the compression ratio is with the low compression head , hopefully someone else on here will know .. I also have an ultra high compression insert for the same head I may use again at some point .. I remember it ran alot stronger off the bottom & cleaner with this insert

Hey guys, recently done a lot of slower riding (mainly spent the day on the pilot) due to taking a new rider out for the day so was just putting about as he's still learning, anyway the bike kept loading up with fuel which required me to clear it out a few times, current jetting is 42p, n3ch...

We all know the n1ef needle , but my question is , does anyone actually like it ? As I see everyone slating it etc and, but the gasgasuk race team (now rieju) run their race bikes with it & they were very successful ?

Has anyone tried a 45 pilot with the popular NECH needle ? Bike is a 21 rieju 300 with an S3 extreme low compression head and I ride around 300m above sea level

Hi guys , I've got a 21 rieju Mr 300 so same bike as a 2018 gasser .. does anyone know of any other brand she's that fit as I'm after a set of supermoto wheels for it

In the shed I've got 2 Suzuki needles (necj & nech). Are either of these any good? also purchased the JD Jetting kit .

Hello guys , I've just purchased a rieju 300 2021 model , we all know it's a gasgas in disguise , what jetting & needle would you guys recommend as a base line ? I'm based in UK , ride about 500m above sea level & average temperature between 8-12 degrees at the moment

As above , after a 250/300 engine, frame, front pipe etc .. or cheap non runner maybe

As title , I'm after a 250/300 engine , frame , front pipe etc . Will consider cheap non runner