Recent content by Wiggy

Hi All, Does anyone know if there's an aftermarket wheel spacer available for Gassers. The OEM ones on my 09 EC 450 are "stuffed" (deeply grooved) after 1200km !:mad:

Hi, Can anyone tell me what the swingarm pivot bolt torque setting is for an 09 EC 450 ? I've been through the poor excuse for a manual that came with the bike and found nothing.

Hi All, Is it normal for the kickstarter on an 09 EC 450 to hit the rear brake pedal when kicking the bike ? wiGGy

Hi All, Can anyone tell me if a 14T front sprocket will fit my 09 EC 450 ? wiGGy

For a good look at the Safari tanks on a GG 4 stroke http://www.dirtbikeworld.net/forum/showthread.php?t=52085&highlight=Safari

OK, I get the idea. When removing the tank use the connector in the middle of the hose :D

Hi All, I removed the tank on my 09 EC450 for the 1st time and found this sticker on the underside of the fuel tank below the fuel pump. What is this push and pull sticker actually referring to ? To disconnect the fuel line between the fuel pump and the injector, I used the a "quick...

Anyone seen an engine manual for the 08/09 450's ?

What's new about the new rear brake pedal ? Does it now have a bearing in it like a KTM so it doesn't get "flogged out" ?

Yep............

So I take it that the hex head bolts that go through the lower part of the radiator shroud still screw in OK to the sides of the radiator.

Next one...... I was looking through the Clarke website and found a tank that "might" fit an 09 EC450, that been the http://www.clarkemfg.com/cgi-bin/miva?Merchant2/merchant.mv+Screen=PROD&Store_Code=CM&Product_Code=11485&Category_Code=gasgas I asked Clarke whether they could confirm if it...

Fergus, I've seen that 10L tank (BFS450710024R) listed in the GG Powerparts catalogue, but it only specifies the 07 model ?? Can I assume that this particular tank will fit an 09 as well ?

Hi All, New to Gassers and I'm looking at getting a new bike in the next few months with the 09 EC450 high on the list of contenders. I'm in a country area so there isn't a Gasser dealer close by to have a look at an EC450 in the flesh, so I thought I'd ask a few questions here before heading...