Recent content by wiking

Thanks for your reply Eric. I just changed my o-rings, as I thought this might be the problem. Almost no difference in pipe vibration!! I used the stock ones though.

Hi Has anyone tried the aluminium cylinder 'stubb' from trialendurodirect? According to their webpage it should stop annoying vibrations, which I have a lot of in my front pipe. Pressing my boot against the front pipe stops the annoying sound, but its hard to drive fast with one foot constantly...

Thanks for the explanation Jyellard. Do you remember what torque it takes to fasten the impeller enough? I will use mild locktite as well. Everyting falls apart on this shakin 2stroke without locktite compared to my Honda XR650R where there is no vibrations.

Hi Josh I just took mine apart the other day, and there is no clip. My thoughts were the same as yours. When I took the impeller off the shaft, the shaft could be pushed thru the bearing - dont know how far in it can go though - didn't dare trying. How do you by the way fasten the bolt for the...

Impeller Hi Guys How do you fasten the impeller once it has been replaced and at what torque? It seems to me like the shaft will just turn when I start to fasten the bolt. A guy recommended to take of the entire side cover, so one could be able to hold the shaft from the other side. Any easier...

I am following this thread, as I have the exact same problem on my GG EC 300, 2008. After a complete dry 4 hour enduro race my red tranny oil has turned into pink = water. BTW do you guys have the left vent hose cut open? It was delivered from factory zip tied, but I read somewhere that this is...

Coulden't agree more. Mine gets dragged through everything:) I only bought the new plastic as everything - and I mean everything was broken after a serious crash. All plastic, radiators, frontwheel, gearpedal, handlebar, barkbusters and probably more - cant remember it all.

Across the "pond" I bought this white set of plastic for my GG EC300, year 2008. Not six-days, but the price was 169 Eur (about 210 USD) including some good quality stickers. The company is fuditec.de

Yes - thanks to Steve for a detailed description. You can sign med up for any of the two tanks as soon they have done the molding needed to fit 2007/2008 EC. Please keep us posted in this thread as soon as they are avaible.

Thanks Ronald. Could you post a picture of how it looks and especially the "problem" with the top rad shroud bolt. If you can not post it, please send it to my email kibsgaardjakob@gmail.com if possible. Thanks in advance. Jakob

Hi Dingo Did you get the part number? I am still looking for a larger tank. Jeff Kaylor from Hall's Cycles wrote the following to me today: "Neither the Clarke nor the IMS fit the 2008 models. You can make them work, but you must modify some items like the seat". How much modification did you...

Hi Folks I am looking for a bigger tank for my GG (who is not?). I am located in Denmark, but am willing to pay the shipping costs. Anyone who has one for sale? Thanks in advance Jakob kibsgaardjakob@gmail.com

Could be. What's the price and what exactely do you have? Complete white plastic with the sixdays decals? /Jakob

Front wheel?