Recent content by Wilmer

Okey, now I?m pretty sure that that gear is the problem. At first I thought that gear had splines. But after looking at the partslist I can see that the gear doesn?t have any splines. And is going to be able to spin freely on the shaft. So I think that the gear have moved a little bit sideways...

Gasgasman, Okey, then I will try to get the gear of it?s chaft. But I cant see how that can be the problem because that gear is on splins on the chaft so it?s not suppose to spin without that the chaft is spinning. But it?s the only weird thing I can find in the gearbox so that is maybe the...

Yes, then that maybe is the problem... When I looked at the partsdiagram it looks like you are able to take the gear of. I just wonder if someone knows that it?s not a gear that is pressed on and is going to be stuck like that?

I?ve now taken both shafts completly apart and everything looks good. No teeth missing, nothing bent or anything... :confused: I also looked at a picture from the partslist and everything is there and on it?s place. But when I took the the shaft apart where the front sprocket is mounted on...

Anders, When i looked at the shift forks and shift drum everything looked good. I can take pictures of it later when i come home. I think I?m going to take the both shafts apart and look at the parts-diagram so everything is as it should. Do you have a mail that I can try to send the video to?

F5, This happend when I was driving, I drove in 5th gear in 50km/h and then the rear wheel locked up.

Gasgasman, Okey, how can I look up if it’s out of time. And how do I adjust that? When I looked at it it seems to be right. All the shift forks is installed correctly.

Anders, The rear wheel locks up. You can change the gear but it can be pretty hard. And you cant get it in to first gear or neutral. When you get it in to a gear you can spin the transmission a little bit and then it binds up. And the same thing if you spin it backwords. It’s almost like it is...

Anders, Okey, I saw now that they don?t work. Im going to se if I can fix it :cool: I also got a good video of it but can’t get it uploaded on the thread...

Hello, I need help with my GasGas EC 125 05 that something have hapend with my gearbox... I can't get it down to neutral or first gear, and it locks up in all the gears exept for second gear. I have split the engine to see if I can find the problem but can't find anything wrong except for a...

I dont really know. I have never done it on the bike but the owner before me did a rebuild on the engine so he problebly have done it. I’m going to do a piston change soon so then I can take the hole powervalve apart and clean. Thank you for your help.

Okey, thank you for the video. I will try that

Hello, I wonder how my gasgas ec 125 06 would peform if my powervalve would be fully open all the time. Is there some way that I can test that? I don't know if my powervalve is set right on my gasgas. Is there some way that I can see if it works as it should? :cool: Thanks

Hello, I'm going to change a gasket on my GasGas EC 125 05. The gasket I'm going to change is the clutch cover gasket. So I'm going to just take the side of and change the gasket and then put everything bak on. I've come so far that the side is now lose but I can't take it of bacause the...

Okey, thank you for your reply. Then the best thing is to replace it with a vent and a hose instead, regardless it makes any differents or not.