'17 ec300 stator specs

GGracing

New member
I am trying to locate specs for the stator- I found a service manual for an 18 which I believe still has the Kokusan 2K-3 stator but none of the color coding matches plus I have a RED/BLUE lead that has been taped off. Has anyone come across this odd colored harness? I'll try and put attachments of photos.
Thanx
 

Attachments

  • ggwiring1.jpg
    ggwiring1.jpg
    124.2 KB · Views: 23
  • ggwiring2.jpg
    ggwiring2.jpg
    118.6 KB · Views: 22
I'm not sure what you are asking. Pic 1 shows a pink/brown/white connector. Pic 2 shows two connectors red/blue and white/brown/yellow. Are all these disconnected on your bike? Or did you unplug them to take photos?

I expect all GG bikes use the 2K3 stator, but with different wiring looms depending on the year and model. Some bikes use AC powered CDIs and some use DC powered CDIs.

The 2K3 probably has a 75W output although I haven't seen published specs.
 
If pic 2 comes from the stator (wires exit the engine case at 2:00 o'clock) the red/blue wires are probably the larger "single winding" on the stator. This is the impulse coil that powers an AC CDI. You likely have a DC CDI so these wires are not used.

Is pic 1 is the female connector that pic 2 male connector plugs into? If so those wires are for the lighting coils.
 
Back
Top