200 cyl head

[RBrider]

Need a cylinder head from a later model EC 200.

I ordered a new oem cylinder kit for my '01 XC 200, but it turned out to be for the later models that use the larger dia o rings , the copper washers under the head bolts and wider spacing for the head bolts.

Any body got one?

RB

 

[Zman]

There is a modified one on Ebay with two plug holes for cheap. Even if you want an original, it should get you by until you find another one.

http://www.ebay.com/itm/2001-Gas-Ga...ash=item488e8ae6dc:g:oh8AAOSwbYZXVf1a&vxp=mtr

 

[RBrider]

There is a modified one on Ebay with two plug holes for cheap. Even if you want an original, it should get you by until you find another one.

http://www.ebay.com/itm/2001-Gas-Ga...ash=item488e8ae6dc:g:oh8AAOSwbYZXVf1a&vxp=mtr

Thanks, that's the older style head. I need the later model.

RB

 

[Zrt1200]

There is this one on E-bay as well.

http://www.ebay.com/itm/222179756345?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

I think you seen my thread for 2 different heads for the 200??

http://www.gasgasrider.org/forum/showthread.php?t=21433

 

[RBrider]

There is this one on E-bay as well.

http://www.ebay.com/itm/222179756345?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

I think you seen my thread for 2 different heads for the 200??

http://www.gasgasrider.org/forum/showthread.php?t=21433

I did see your thread, back when you posted it. I just didn't know at the time that it would apply to me LOL. I posted some info regards the A & B cyl. markings there, if you want to check it out.

I saw that one on Ebay, it looks a little rough in the combustion chamber area.
It's an option, though. Thanks for posting it.

RB

 

[gasgasxc]

I might have that.
Would like to sell head and barrel.Both are in good runnable shape.
1999 ec 200

 

[RBrider]

Thanks,but I found one. RB