2000 250 forks

[Rabbitist]

im not sure what forks i have they are not usd and they have a plastic cap on top for adjusting.. Any help?

 

[twowheels]

Measure the diameter and post some pics if you can. Likely either the WP or Marzocchi conventionals.

 

[Rabbitist]

Thanks if you look on my profile there is a few pics but I'm not sure how to post them in threads???

 

[jhendr3702]

Thanks if you look on my profile there is a few pics but I'm not sure how to post them in threads???

it is the Marzocchi conventionals.
__________________

 

[Rabbitist]

cheers lads are these 45mm conventionals and does anyone know where to get a manual for stripping them?

 

[jhendr3702]

cheers lads are these 45mm conventionals and does anyone know where to get a manual for stripping them?

i think so.. i had a bike with those on it.. it was a sweet set up..

 

[Rabbitist]

i agree they are great forks just seem to float over anything i throw at them.. anyone know where i can get the manual ?
cheers luke

 

[jhendr3702]

i agree they are great forks just seem to float over anything i throw at them.. anyone know where i can get the manual ?
cheers luke

not a clue.. someone on here sent me a bunch of info on mine, but that was 5 years ago and a few dead computers..

 

[Dave]

There's some info here: http://www.marzocchi.co.uk/documents/techinfo/Magnum_techinfo.html

 

[Rabbitist]

thanks guys would it be the magnum 98's then?

 

[Rabbitist]

So my forks have the blue plastic adjusters and the stanchions are just under 45mm diameter according to the info posted my forks are magnum 50 but when I look at the exploded diagram the split where the wheel axel goes through is on the front were as my forks have the split on the bottom.. Can anyone help me with identifying them please? Also if anyone has a link for the manual once I know what model they are thanks luke

 

[Rabbitist]

They are the forks on page 12 of the 2000 ec parts list if that helps..

 

[Rabbitist]

They may be called zokes..?

 

[GMP]

Should be Marzocchi Magnum 45mm, conventional forks. Thats what the Euro or World spec '00 ECs came with. We got some of those, but mostly USA special "XC"s with WP43s.

 

[Rabbitist]

Are these the same forks as on the mz660 from 1998-2002?

 

[Rabbitist]

anyone know roughly how much oil I'll need so I know how much to buy?