MattR
Super Moderator
2001 GasGas XC250:
Street Titled and Plated in Michigan!!!
Bought used in June 2004 from dealer. It was his personal bike and was well maintained.
Since I have owned it, I have always keep it in top running condition.
Bike runs clean and strong. No issues just get on and ride!
This bike is a pleasure to ride and very dependable.
Maintenance History:
Electrical Components Include:
Upgrades Include:
Spare Parts Include:
I’m asking $2200 with the upgrades listed above. I can reduce the price if some of the guards are removed. Delivery can be arranged within 100 mile radius from me or we could meet halfway depending upon total distance. I can crate and ship the bike anywhere within the USA, but you will pay shipping costs (approx. $300). Sorry, no international or border crossings.
Thanks for reading. I hope to hear from you!
I can be reached by either PM or email: matt@gasgasrider.org
Street Titled and Plated in Michigan!!!
Bought used in June 2004 from dealer. It was his personal bike and was well maintained.
Since I have owned it, I have always keep it in top running condition.
Bike runs clean and strong. No issues just get on and ride!
This bike is a pleasure to ride and very dependable.
Maintenance History:
- Tranny oil changed every 100 miles (Rotella T 5w-40).
- Air filter cleaned every other ride (or earlier if needed).
- Mobil Racing 2T premix @ 40:1 with premium 94 octane fuel.
- Bearings regreased every 6 months.
- Suspension setup for 180-190 lb rider.
Electrical Components Include:
- Head Light with Hi/Lo/Off Toggle Switch
- Tail Light
- Brake Light with Front Brake Switch
- Horn
- No Turn Signals (not required for Michigan)
Upgrades Include:
- LTR Jet Kit
- LTR Steel-Braided Throttle Cable
- LTR Water Pump Impeller
- Trail Tech Endurance Computer
- Trail Tech Billet Computer Guard
- Devol Front Disc Guard
- Enduro Engineering Rear Disc Guard
- Flatland Skid Plate
- Flatland Radiator Guards w/ Braces
- Guts Racing Tall Seat Foam
- Guts Racing Gripper Cover
- Moose Fatty Bar Risers
- Renthal Fatty Bar (Enduro Bend)
- Moose Bark Busters
- FMF Gnarly Pipe (installed June 2006, no dents)
- FMF Turbine Core 2 Silencer/Spark Arrestor
- Front Tire = Michelin S12 (moderate wear)
- Rear Tire = Metzeler MC4 (light wear)
- Motion Pro Rim Locks
- 13T Ironman Front Sprocket (installed Nov. 2006)
- 50T Ironman Rear Sprocket (installed Nov. 2006)
- Regina ORN Oring Chain (installed Nov. 2006)
Spare Parts Include:
- FMF Gnarly Pipe (original with some dents)
- Moose Aluminum Pipe Guard
- Stock Seat Cover
- Stock Seat Foam
I’m asking $2200 with the upgrades listed above. I can reduce the price if some of the guards are removed. Delivery can be arranged within 100 mile radius from me or we could meet halfway depending upon total distance. I can crate and ship the bike anywhere within the USA, but you will pay shipping costs (approx. $300). Sorry, no international or border crossings.
Thanks for reading. I hope to hear from you!
I can be reached by either PM or email: matt@gasgasrider.org
Last edited:
