2001 GG 200 endro

[lvnspeed]

I got a deal on a 2001 Gas Gas 200 endro. Here is the the problem the motor is locked up. looking for either a place to buy parts or a used motor

Oh yea I will need some plactics too.

How hard would it be to turn it into a supermotar?

Ok so I found out I have a xc200 not an endro. My bad......

 

[widebear]

Ive got a brand new cylinder and piston if your interested

 

[lvnspeed]

How much shipping to Birmingham AL 35209 USA?

 

[widebear]

200 top end

pm sent re jug

 

[Rick]

Before you get carried away with a full blown rebuilt, pull the top end and see if a "crank stuff" bolt worked it's way out and is jamed between the rod and crank. Then go from there...

 

[lvnspeed]

Thanks I am going to take it apart tonight.

 

[lvnspeed]

Ok I got it apart tonight and there is nothing wrong with the top end THANKS RICK

Where is the bolt your taking about? Cranks stuff bolt?????

 

[ramcclure200]

lvnspeed	Ok I got it apart tonight and there is nothing wrong with the top end THANKS RICK

Where is the bolt your taking about? Cranks stuff bolt?????

This is where I found mine

 

[lvnspeed]

I did see anything wedged in the crank/case. I will keep looking tonight I am going to pull the side covers off maybe something in there.

 

[lvnspeed]

Found the problem a crank bearing was going away.

a couple of questions:

Should I have the whole crank rebuilt?
Who can do it?
Are there gasket/seal/oring kits

Any parts layouts?
When I split the cases a couple of thing fell out and I an not sure where they go

 

[widebear]

you can get a pro x honda con rod kit that will fit the gasser for $75.00 from monkeybutt parts includes rod, bearings and crankpin, gofasters or north tahoe can hook you up for bearings seals and gskts

 

[Rick]

check this out: http://translate.google.com/transla...ww.embarrados.com/gasgas/viewtopic.php?t=2265