Hi folks,
Just gauging interest.
Mate bought an EC300 about 5 months ago and left it to me to work at, has had a cylinder, head and new piston to make it a 250 (300 cylinder was cracked), new carb + all new jets, wheel bearings, KYB Open chamber forks serviced, shock serviced, wiring tidied up, new seat, cracked subframe welded, rear light fitted ready for MOT.
Bike has not been registered before and GGUK have no record of it, I started the process for him and have NOVA reference, so will just need MOT and V55/5 form (supplied) sent off.
Since the above work was done he has put about 15mins on it, hes a road biker at heart and cant gel with offroad riding, (he done the same with a drz too, I spend hrs fixing it and he sells it
)
Old photo
He is about 1400 into it and looking to recoup what he can. so open to offers
Give me PM here if you would like further info and pics etc.
Just gauging interest.
Mate bought an EC300 about 5 months ago and left it to me to work at, has had a cylinder, head and new piston to make it a 250 (300 cylinder was cracked), new carb + all new jets, wheel bearings, KYB Open chamber forks serviced, shock serviced, wiring tidied up, new seat, cracked subframe welded, rear light fitted ready for MOT.
Bike has not been registered before and GGUK have no record of it, I started the process for him and have NOVA reference, so will just need MOT and V55/5 form (supplied) sent off.
Since the above work was done he has put about 15mins on it, hes a road biker at heart and cant gel with offroad riding, (he done the same with a drz too, I spend hrs fixing it and he sells it
)Old photo
He is about 1400 into it and looking to recoup what he can. so open to offers
Give me PM here if you would like further info and pics etc.
![IMG-20180713-WA0001[1].jpg](/data/attachments/6/6776-cbd7719e77333d596b9cd548fbe1b4f8.jpg?hash=y9dxnnczPV)